Clutch pedal too soft/no feel? Remove the helper spring!

Armonster · 05-09-2011, 11:53 AM

subscribed for more feedback

kenoverbey · 05-10-2011, 08:43 AM

Quote:

Originally Posted by kenoverbey

Can't wait to try it. I hate the clutch on these cars.

I did it. Definite improvement.

cruzmisl · 06-16-2011, 12:03 PM

I still have a few mm of soft pedal at the top, which I'm now not sure was there before with the stock spring. It goes all the way up, but I can very easily tap it and make it move a few mm.

Is it possible something is loose now? Or am I going crazy from having to work on it for so long last night?

I'm very happy with the mod and won't go back to the stock spring, but after all that work last night I wonder if something happened. Just checking to see how it feels with other people.

esfourteen · 06-16-2011, 01:15 PM

Quote:

Originally Posted by cruzmisl

I still have a few mm of soft pedal at the top, which I'm now not sure was there before with the stock spring. It goes all the way up, but I can very easily tap it and make it move a few mm.

Is it possible something is loose now? Or am I going crazy from having to work on it for so long last night?

I'm very happy with the mod and won't go back to the stock spring, but after all that work last night I wonder if something happened. Just checking to see how it feels with other people.

the soft pedal at the top is just the travel in the small spring before it hits the point where the pressure plate engages and larger spring expands, I believe it was always there but you couldn't tell the difference because of how soft the pedal was overall.

Hilla_killa · 12-08-2016, 08:30 AM

Delete

370zFORme!! · 05-09-2011, 12:51 PM

Ok so its been a couple of days and I dont know what happened but the 1/2" dead pedal I had at the top of the pedal range is now gone. I dont know if driving for a couple of days had any effect on this, but its pretty tight now. Not only that but I feel like the clutch should have come this way from the factory. Feels so much better. This is prob the coolest, easiest, and most practical mod.

esfourteen · 05-09-2011, 02:58 PM

Yep this is a great free mod, I love the stock clutch now. I'm really surprised more people aren't chiming in/trying this out, its easily reversible.

roplusbee · 05-09-2011, 04:01 PM

I won't go back.............It is really good without it.

KingZee · 05-09-2011, 05:29 PM

Quote:

Originally Posted by roplusbee

I won't go back.............It is really good without it.

Did your 1/2in slack disappear as well like 370zForme! by any chance? This is amazing news btw, I've been wondering wtf is wrong with the 370Z clutch!

chops · 05-09-2011, 05:17 PM

im going to try this tonight! cant wait to see how it affects my shifting

gaveup · 05-09-2011, 05:55 PM

just did it.

Amazing. Just a little driving and it was way smoother.

Side note, I just removed the bottom pin and it was retarded hard to get out, and even harder to get back in...If I decide to put it back (warranty work) I have no idea how I am getting it back in.

I just left the top pin and the other shaft because it seemed like it was too much hassle to remove it. It doesn't hurt anything just hanging out there.

esfourteen · 05-09-2011, 06:12 PM

Quote:

Originally Posted by gaveup

just did it.

Amazing. Just a little driving and it was way smoother.

Side note, I just removed the bottom pin and it was retarded hard to get out, and even harder to get back in...If I decide to put it back (warranty work) I have no idea how I am getting it back in.

I just left the top pin and the other shaft because it seemed like it was too much hassle to remove it. It doesn't hurt anything just hanging out there.

it takes 2 minutes to remove or install the entire assembly:

Use a pair of needle nose pilers or a small flat head screw driver to remove the C clips on the pins.

Release the pressure on the spring by depressing the clutch pedal with one hand, tap the pins out.

gaveup · 05-09-2011, 07:12 PM

Quote:

Originally Posted by esfourteen

it takes 2 minutes to remove or install the entire assembly:

Use a pair of needle nose pilers or a small flat head screw driver to remove the C clips on the pins.

Release the pressure on the spring by depressing the clutch pedal with one hand, tap the pins out.

hehe I already had it out

KingZee · 05-09-2011, 06:18 PM

Quote:

Originally Posted by gaveup

just did it.

Amazing. Just a little driving and it was way smoother.

Side note, I just removed the bottom pin and it was retarded hard to get out, and even harder to get back in...If I decide to put it back (warranty work) I have no idea how I am getting it back in.

I just left the top pin and the other shaft because it seemed like it was too much hassle to remove it. It doesn't hurt anything just hanging out there.

This really shouldn't void warranty, has nothing to do with anything really.

F4iMerlin · 05-09-2011, 06:59 PM

I too just did this mod. This is how a clutch pedal is supposed to feel. The stock feel wasn't terrible, but like others noted, there was no pressure plate feedback.
I do notice a little slack at the top of the pedal now however. Will give it a day or two and see if it goes away.

12-08-2016, 08:30 AM	#5 (permalink)
Hilla_killa Base Member Join Date: Oct 2016 Location: Connecticut Posts: 89 Drives: 13 370Z T/S/N 6mt Rep Power: 9	Delete Last edited by Hilla_killa; 12-08-2016 at 08:42 AM.

05-09-2011, 12:51 PM	#6 (permalink)
370zFORme!! Premium Member Join Date: Mar 2010 Location: SoCal Posts: 1,459 Drives: 2012 6MT STiffy Rep Power: 18	Ok so its been a couple of days and I dont know what happened but the 1/2" dead pedal I had at the top of the pedal range is now gone. I dont know if driving for a couple of days had any effect on this, but its pretty tight now. Not only that but I feel like the clutch should have come this way from the factory. Feels so much better. This is prob the coolest, easiest, and most practical mod. __________________ 87' Honda Civic Hatchback: Kaput @ 288,000 miles, 90' Toyota Celica: Kaput @ 175,000 miles, 93' Mitsubishi 3000GT VR4: Kaput @ 138,000 miles, 06' Scion Tc: Traded in @ 64,000 miles, 10' Nissan 370z: Traded in @ 25,000 miles, 12' Subaru Impreza Sti: Current.

05-09-2011, 02:58 PM	#7 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 19	Yep this is a great free mod, I love the stock clutch now. I'm really surprised more people aren't chiming in/trying this out, its easily reversible. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

05-09-2011, 04:01 PM	#8 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	I won't go back.............It is really good without it. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

05-09-2011, 05:55 PM	#11 (permalink)
gaveup Enthusiast Member Join Date: Aug 2010 Location: Tamarac FL Posts: 324 Drives: 10 Nissan 370Z MB M6 Rep Power: 181	just did it. Amazing. Just a little driving and it was way smoother. Side note, I just removed the bottom pin and it was retarded hard to get out, and even harder to get back in...If I decide to put it back (warranty work) I have no idea how I am getting it back in. I just left the top pin and the other shaft because it seemed like it was too much hassle to remove it. It doesn't hurt anything just hanging out there. __________________ 2010 Magnetic Black Metallic 370Z 6M stillen gen 3 CAI - topspeed test pipes - invidia gemini CBE - UpRev tune 301whp (HP Logic Mustang Dyno)

05-09-2011, 11:53 AM	#1 (permalink)
Armonster Enthusiast Member Join Date: Mar 2011 Location: Atlanta, GA Posts: 270 Drives: 2010 370z t/sp/6mt Rep Power: 15	subscribed for more feedback

06-16-2011, 12:03 PM	#3 (permalink)
cruzmisl Base Member Join Date: Feb 2010 Location: Hillsboro, OR Posts: 122 Drives: 08 G37S 6MT Rep Power: 16	I still have a few mm of soft pedal at the top, which I'm now not sure was there before with the stock spring. It goes all the way up, but I can very easily tap it and make it move a few mm. Is it possible something is loose now? Or am I going crazy from having to work on it for so long last night? I'm very happy with the mod and won't go back to the stock spring, but after all that work last night I wonder if something happened. Just checking to see how it feels with other people.

05-09-2011, 05:17 PM	#10 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	im going to try this tonight! cant wait to see how it affects my shifting

05-09-2011, 06:59 PM	#15 (permalink)
F4iMerlin Base Member Join Date: Mar 2011 Location: Bonaire, GA Age: 46 Posts: 45 Drives: 2010 Touring Rep Power: 15	I too just did this mod. This is how a clutch pedal is supposed to feel. The stock feel wasn't terrible, but like others noted, there was no pressure plate feedback. I do notice a little slack at the top of the pedal now however. Will give it a day or two and see if it goes away.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
light clutch pedal?	boosted180	Engine & Drivetrain	21	06-07-2014 01:53 PM
clutch pedal issues?	xgrudgex	Engine & Drivetrain	17	01-31-2011 08:44 PM
How does your OEM clutch feel?	AlphaSnacks	Engine & Drivetrain	78	12-20-2010 11:04 AM
Knock from the clutch pedal	Oscar135	Engine & Drivetrain	34	07-27-2010 12:10 PM