Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

MrPostman · 10-08-2018, 08:29 PM

I have noticed an issue with my CSC, it works fine with the clutch pedal letting out in the correct spot driving it normal and hard, but if I rev it out of gear to near redline I can feel it engage lower to the floor. Then after I mash it about 20 or 30 times it will correct itself and start engaging in the correct spot again. Anyone else have this issue?

TreeSemdyZee · 10-08-2018, 09:06 PM

Quote:

Originally Posted by MrPostman

I have noticed an issue with my CSC, it works fine with the clutch pedal letting out in the correct spot driving it normal and hard, but if I rev it out of gear to near redline I can feel it engage lower to the floor. Then after I mash it about 20 or 30 times it will correct itself and start engaging in the correct spot again. Anyone else have this issue?

Might need to be bled. You're probably losing pressure in the hydraulics.
Sort of normal. I manage to embarrass my self quite often when sitting at stop lights. I'll hold the clutch in waiting for the light to change, then kill it because the point has dropped a bit. Or it's just weak middle-aged legs.

Joe@ZSpeed · 10-09-2018, 08:44 AM

Quote:

Originally Posted by MrPostman

I have noticed an issue with my CSC, it works fine with the clutch pedal letting out in the correct spot driving it normal and hard, but if I rev it out of gear to near redline I can feel it engage lower to the floor. Then after I mash it about 20 or 30 times it will correct itself and start engaging in the correct spot again. Anyone else have this issue?

This is actually just the stock clutch doing that, It's called "reversing" At high rpm the clutch fingers are trying to stay in the forward position just from the rotational force being applied to them at high rpm. One reason I hate the stock clutch.

MrPostman · 10-09-2018, 12:13 PM

Quote:

Originally Posted by Joe@ZSpeed

This is actually just the stock clutch doing that, It's called "reversing" At high rpm the clutch fingers are trying to stay in the forward position just from the rotational force being applied to them at high rpm. One reason I hate the stock clutch.

Makes sense to me, thanks for the explanation. One of your clutches will be going in the car when the time comes, most likely the "EZ street quiet clutch" and the CMAK v2.

russw007 · 11-03-2018, 05:35 PM

I have a 2015 nismo with 26k on it. I baby this thing and today I'm getting in it and push the clutch to the floor to start it and it snaps to the floor! Won't return on its own. I have to manually move it back to the top. I push it in again and it snaps back to the floor and stays there.

BoneZ · 11-04-2018, 12:58 PM

Quote:

Originally Posted by russw007

I have a 2015 nismo with 26k on it. I baby this thing and today I'm getting in it and push the clutch to the floor to start it and it snaps to the floor! Won't return on its own. I have to manually move it back to the top. I push it in again and it snaps back to the floor and stays there.

You have to expect certain repairs will be needed for such an old high-mileage car.

theART · 11-09-2018, 05:52 PM

Has anyone installed this metal CSC from ebay?

Winter is coming and I will be doing upgrades and repairs, might as well beef up CSC while at it.

Rusty · 11-09-2018, 07:12 PM

Seriously?

Joe@ZSpeed · 11-15-2018, 11:27 AM

Quote:

Originally Posted by theART

Has anyone installed this metal CSC from ebay?

Winter is coming and I will be doing upgrades and repairs, might as well beef up CSC while at it.

Just fix it right

10-08-2018, 08:29 PM	#1 (permalink)
MrPostman Base Member Join Date: Jun 2018 Location: Alabama Age: 57 Posts: 41 Drives: 2010 Nissan 370Z M6 Rep Power: 9	I have noticed an issue with my CSC, it works fine with the clutch pedal letting out in the correct spot driving it normal and hard, but if I rev it out of gear to near redline I can feel it engage lower to the floor. Then after I mash it about 20 or 30 times it will correct itself and start engaging in the correct spot again. Anyone else have this issue? __________________ Life is short, don't waste your time driving something boring.....

11-09-2018, 05:52 PM	#7 (permalink)
theART Base Member Join Date: Feb 2009 Location: BC Posts: 165 Drives: To Drive Rep Power: 7824	Has anyone installed this metal CSC from ebay? Winter is coming and I will be doing upgrades and repairs, might as well beef up CSC while at it. Last edited by theART; 11-09-2018 at 05:56 PM.

11-09-2018, 07:12 PM	#8 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,579 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Seriously? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 07:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 10:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 08:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 09:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 07:03 AM

11-03-2018, 05:35 PM	#5 (permalink)
russw007 Base Member Join Date: Mar 2014 Location: nh Posts: 50 Drives: Black 2015 Nismo Rep Power: 13	I have a 2015 nismo with 26k on it. I baby this thing and today I'm getting in it and push the clutch to the floor to start it and it snaps to the floor! Won't return on its own. I have to manually move it back to the top. I push it in again and it snaps back to the floor and stays there.