Deceleration Vibration

ZoomZ · 05-18-2024, 10:54 AM

Quote:

Originally Posted by Smokey Nagata

My Torque Solution Billet Aluminum Transmission Mount with 75A Durometer Urethane took some time to break in as upon installation there was heavy vibration throughout the rev-range. After about a month or so the vibration dampened and the NVH was much improved, not stock like but better. However the main holding bolt ended up backing out unknowingly after about a year and caused weird noises upon start up and cold operation that took me a while to track down. I ended up swapping back to the stock piece, repaired the TS mount & lock tightened the main bolt and sold it.

Thats a good point. It is still fairly new. (the TM) Maybe I'll give it some time.

I think it is the gear backlash that I feel and hear upon releasing throttle and coasting in gear.

Interesting about the Torque solution mount. When I got mine that center bolt was almost back right out and loose.

I e-mailed TS and asked about the tourque of that screw and it was only 80 in.lb. I did apply some blue locktite before I torqued it. Otherwise nothing holding it in positively.

zz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Loud whining noise on deceleration	brandad_1	Engine & Drivetrain	7	09-02-2022 01:41 PM
Shaking accelration and deceleration	Jonesmeister1	Engine & Drivetrain	12	02-15-2021 08:52 AM
Low RPM vibration	RanRich	Engine & Drivetrain	2	11-23-2015 09:11 AM
My 370z click during deceleration solved	TheBoomSpoon	Engine & Drivetrain	7	09-24-2014 11:41 AM
Shifter Vibration/ Shift knob vibration	BlackCherryZ	Nissan 370Z General Discussions	31	01-16-2010 09:53 AM