Engine Builder Needed

cgr406 · 05-28-2023, 01:45 PM

Anyone know of a good quality VQ engine builder anywhere in the lower 48? I need a build that will support 700whp. I've already spoken w/ Mark @ Mazworx in FL, but am looking for additional options.

Spooler · 05-28-2023, 04:56 PM

A normal build won't hold over time. Been there done that before. My first engine I ran at 718whp most of the time. Headgaskets didn't hold. That engine went in the garbage. I could only save the JWT C2 cams. Your choices are very limited. You can try to experiment and see if it holds or just shell out the coin and do it right the first time. If you have a problem with the first build you will have paid for the better engine doing the 2nd build. Choice is yours.

Rusty · 05-28-2023, 06:18 PM

Listen to the man. He's been there and paid the price.

Spooler · 05-28-2023, 07:29 PM

Quote:

Originally Posted by Rusty

Listen to the man. He's been there and paid the price.

Thanks for reminding me.

Spooler · 05-28-2023, 08:08 PM

You can always put a stock block back in it and turn it down.

cgr406 · 05-29-2023, 10:44 AM

Yeah, that's not gonna happen. Haha.

Sent from my SM-G998U using Tapatalk

cgr406 · 05-29-2023, 10:46 AM

Seems like Mazworx is my best odds to hopefully only do this once. Just takes me a bit to get over the sticker shock. Thanks for the input.

Sent from my SM-G998U using Tapatalk

Spooler · 05-29-2023, 11:40 AM

Quote:

Originally Posted by cgr406

Seems like Mazworx is my best odds to hopefully only do this once. Just takes me a bit to get over the sticker shock. Thanks for the input.

Sent from my SM-G998U using Tapatalk

My first built engine was right at 12k or a little higher. The Mazworx engine is not that much more.

Spooler · 05-29-2023, 11:41 AM

If you steam cut/ plasma cut the block at the bores, you are going to need a new junk yard engine. Been there done that before too.

cgr406 · 05-29-2023, 12:18 PM

Yep.

Sent from my SM-G998U using Tapatalk

cgr406 · 05-29-2023, 12:19 PM

My fingers r crossed, but we will see.

Sent from my SM-G998U using Tapatalk

05-28-2023, 01:45 PM	#1 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3366	Engine Builder Needed Anyone know of a good quality VQ engine builder anywhere in the lower 48? I need a build that will support 700whp. I've already spoken w/ Mark @ Mazworx in FL, but am looking for additional options. __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

05-28-2023, 04:56 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,516 Drives: 2013 Nismo 370z Rep Power: 2684391	A normal build won't hold over time. Been there done that before. My first engine I ran at 718whp most of the time. Headgaskets didn't hold. That engine went in the garbage. I could only save the JWT C2 cams. Your choices are very limited. You can try to experiment and see if it holds or just shell out the coin and do it right the first time. If you have a problem with the first build you will have paid for the better engine doing the 2nd build. Choice is yours. Streetlife, JARblue, danegrey and 1 others like this. Last edited by Spooler; 05-28-2023 at 04:59 PM.

05-28-2023, 06:18 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,866 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Listen to the man. He's been there and paid the price. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-29-2023, 10:44 AM	#6 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3366	Yeah, that's not gonna happen. Haha. Sent from my SM-G998U using Tapatalk __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

05-29-2023, 10:46 AM	#7 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3366	Seems like Mazworx is my best odds to hopefully only do this once. Just takes me a bit to get over the sticker shock. Thanks for the input. Sent from my SM-G998U using Tapatalk __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

05-28-2023, 08:08 PM	#5 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,516 Drives: 2013 Nismo 370z Rep Power: 2684391	You can always put a stock block back in it and turn it down.

05-29-2023, 11:41 AM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,516 Drives: 2013 Nismo 370z Rep Power: 2684391	If you steam cut/ plasma cut the block at the bores, you are going to need a new junk yard engine. Been there done that before too.

05-29-2023, 12:18 PM	#10 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3366	Yep. Sent from my SM-G998U using Tapatalk __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

05-29-2023, 12:19 PM	#11 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3366	My fingers r crossed, but we will see. Sent from my SM-G998U using Tapatalk __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best motor builder or switch platforms?	shadow85	Engine & Drivetrain	26	10-09-2021 01:12 PM
I need to replace my Engine!! Help Needed.	R0bDC	Nissan 370Z General Discussions	45	09-12-2016 07:12 PM
Low Oil Caused Dead Engine - Advice needed	mikechap	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	29	09-06-2014 05:11 PM
GTR - Nissan trains 5th builder. GTR nismo to be 2sec flat to 60?	UNKNOWN_370	Other Vehicles	9	10-09-2013 12:24 PM
VQ engigne builder	Z eliminator	Canada	9	10-10-2012 09:18 AM