Shortened output shaft play

weebs25 · 04-11-2022, 02:49 PM

Curious what everyone has done that shortened their drivers side shaft when ditching the vlsd? It fits right in but doesn’t lock in..slides back and forth. When I removed it from the vlsd it had no ring or anything locking it in place? Cut 1.7 inches off and put it into a Wavetrac.

JARblue · 04-11-2022, 03:08 PM

You just cut the stub axle?

I thought the VLSD stub axles were shorter on the driver (LH) than the passenger (RH) side. So for the Wavetrac you need to replace the RH side stub axle with the shorter stub axle used on the LH side.

weebs25 · 04-11-2022, 03:12 PM

I cut the longer one, and going off Z1s site if I buy one to replace it says it replaces the drivers side “left if your sitting in the car” original short one snapped right in, this has nothing on it when I took it out and all the others who did this looks the same? I had 1.7 taken off. Slides in and bolts up etc no prob it just doesn’t lock. It can slide in and out..don’t really want this thing popping out.

JARblue · 04-11-2022, 04:16 PM

Should be fine once you bolt everything back together, no? If you're worried about it then just do it right with a second LH stub axle.

weebs25 · 04-11-2022, 05:02 PM

It all fits etc but it does slide around - mostly curious if that has happened to anyone else. It slid all the way out???? Just did gtm sc/flywheel/clutch/ csc elim/fuel pump and top hat /diff all at once.. saving a little where I can I’m case I have bigger issues car starts first time in a few days

The car is on stands — it’s doing this not dropped on the ground

Rusty · 04-11-2022, 05:05 PM

I got my shorty stud shaft from Z1. If had a snap ring on it to lock it into place.

weebs25 · 04-11-2022, 05:15 PM

Thanks I noticed they do- and mine never had one even when removing it which is what had me confused. I’ll get one coming shortly just getting all
The other things done first. Just thought If this worked for others why the hell not since I was working in a machine shop at the time
And the teacher did it for nothing

weebs25 · 04-14-2022, 07:21 PM

Just me being dumb. Bought the clip like the other side. Problem solved for anyone who cares! Moves 1/8 inch more than the other side.

04-11-2022, 02:49 PM	#1 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 224 Drives: 09 black mt Rep Power: 3368	Shortened output shaft play Curious what everyone has done that shortened their drivers side shaft when ditching the vlsd? It fits right in but doesn’t lock in..slides back and forth. When I removed it from the vlsd it had no ring or anything locking it in place? Cut 1.7 inches off and put it into a Wavetrac.

04-11-2022, 03:08 PM	#2 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	You just cut the stub axle? I thought the VLSD stub axles were shorter on the driver (LH) than the passenger (RH) side. So for the Wavetrac you need to replace the RH side stub axle with the shorter stub axle used on the LH side. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-11-2022, 04:16 PM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Should be fine once you bolt everything back together, no? If you're worried about it then just do it right with a second LH stub axle. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-11-2022, 05:05 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,488 Drives: 2011 Nismo GM 6M Rep Power: 2684438	I got my shorty stud shaft from Z1. If had a snap ring on it to lock it into place. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-14-2022, 07:21 PM	#8 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 224 Drives: 09 black mt Rep Power: 3368	Just me being dumb. Bought the clip like the other side. Problem solved for anyone who cares! Moves 1/8 inch more than the other side. JARblue and Rusty like this.

04-11-2022, 05:02 PM	#5 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 224 Drives: 09 black mt Rep Power: 3368	It all fits etc but it does slide around - mostly curious if that has happened to anyone else. It slid all the way out???? Just did gtm sc/flywheel/clutch/ csc elim/fuel pump and top hat /diff all at once.. saving a little where I can I’m case I have bigger issues car starts first time in a few days The car is on stands — it’s doing this not dropped on the ground

04-11-2022, 05:15 PM	#7 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 224 Drives: 09 black mt Rep Power: 3368	Thanks I noticed they do- and mine never had one even when removing it which is what had me confused. I’ll get one coming shortly just getting all The other things done first. Just thought If this worked for others why the hell not since I was working in a machine shop at the time And the teacher did it for nothing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 heavy duty short output shaft axle reliability.	THIRSTINMORE	Engine & Drivetrain	10	08-07-2020 01:18 PM
Max Alternator Output	Juleous	Audio & Video	24	05-25-2020 12:10 PM
Play in drive shaft and thump under hard shift	frankiev	Engine & Drivetrain	8	03-03-2016 01:08 PM
Quick help needed on output shaft.	dirTy_shoeZ	Engine & Drivetrain	2	02-04-2014 02:42 PM
2011 Bose+NoNav+iSimple = Shortened XM Titles?	Augustus	Audio & Video	4	07-30-2013 08:04 AM