|
Well there's a 5th option however this one is a bit more expensive, requires a BSP adapter and wiring to adjust new values. Haltech Bosch came out with a single
|
|||||||
28Likes
|
|
LinkBack | Thread Tools | Display Modes |
06-07-2022, 07:52 AM
|
#11 (permalink) |
|
Base Member
Join Date: Apr 2021
Location: Florida
Posts: 216
Drives: G37S
Rep Power: 26849   |
Well there's a 5th option however this one is a bit more expensive, requires a BSP adapter and wiring to adjust new values.
Haltech Bosch came out with a single physical sensor that reads temperature and pressure as well. If the values can be adjusted via resistors it could technically work. In all reality the ECM would just need to see the same high oil temp voltages as the OEM. Under this condition it just serves as a monitor. 4 wires $100-$130 sensor + connector External Oil pressure monitoring device is required, it's possible that this same sensor can be connected to the A/C pressure switch or Evap pressure switch to display OIL PSI on ECUTEK.    
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| BERK HFC OR STILLEN HFC??? Price and 02 sender problems | Brandonsown | Intake/Exhaust | 1 | 10-21-2015 11:01 PM |
| Fuel sender problemo | Jordo! | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 46 | 08-11-2011 07:20 AM |
| Combination Meter | 370Z_Fan | Exterior & Interior | 1 | 12-19-2010 07:13 AM |
| Best intake/exhaust combination | PR370z | Intake/Exhaust | 14 | 12-06-2010 02:29 PM |
| Most unloved color combination...... | cave vulture | Nissan 370Z General Discussions | 17 | 07-30-2009 10:05 AM |
Threaded Mode
