Combination Oil Sender. Why does no one talk about this?

SonicVQ · 01-06-2022, 08:18 AM

Quote:

Originally Posted by phunk

Many many people have cracked the pan messing with the sensor or installing a different one. Let along hanging a large bulky one in that port like shown in the original post here, I feel like a good pothole will make that thing break the bung off the pan

Understood... I read about others having that same issue and not just on this engine.
Pegasus Auto Racing has an excellent article on NPT fitting and how much to tighten the tapered NPT fittings: https://www.pegasusautoracing.com/do...ocID=TECH00097

In a nutshell, they recommend any 1/8" NPT fitting only needs 1.5 - 3 turn from finger tight.
When I put in my pressure sensor, I used a thread sealer and did 1.5 turns and started the engine to check for leaks. I had a small drip, so I tightened an addition 1/2 turn, and all is good to this day.

In the spring I am going to put on a sandwich plate with a pressure sensor.
This will place the pressure sensor BEFORE the oil filter, and the factory located pressure sensor will measure the pressure AFTER the oil filter.

Then I will be able to test the pressure drop for different oil filters, by engine RPM and oil temperature.
I am really curious to see how much pressure drop difference there is between oil filters.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BERK HFC OR STILLEN HFC??? Price and 02 sender problems	Brandonsown	Intake/Exhaust	1	10-21-2015 11:01 PM
Fuel sender problemo	Jordo!	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	46	08-11-2011 07:20 AM
Combination Meter	370Z_Fan	Exterior & Interior	1	12-19-2010 07:13 AM
Best intake/exhaust combination	PR370z	Intake/Exhaust	14	12-06-2010 02:29 PM
Most unloved color combination......	cave vulture	Nissan 370Z General Discussions	17	07-30-2009 10:05 AM