12-05-2019, 11:36 PM
|
#9 (permalink)
|
|
Base Member
Join Date: Jan 2012
Location: Scottsdale, AZ
Posts: 7
Drives: 2019 SprtTouring 6MT
Rep Power: 15
|
Quote:
Originally Posted by nis350
I think Nissan just used a different clutch for the newer model. The transmission and the clutch hydraulic (cmc & csc) haven't changed.
you can always replace it with the older version of the clutch and that noise should be eliminated.
|
That's interesting. I was under the impression that the CSC was new as well, but it looks like you're right - the Nissan parts site lists the same master and slave cylinder part numbers for model years 2009-2020. Same goes for the pilot bushing (which they also replaced during both of the repair attempts) and the flywheel (which they replaced the last time). The pressure plate and friction disc are the only parts I can find in that area that have different part numbers starting in 2018.
As far as installing the older OEM clutch, Nissan previously told me it's not compatible with the newer car. No idea why that would be, but I can ask again. Otherwise I'll see if I can get them to pay for an aftermarket clutch rather than just replacing the CSC again...
|
|
|
5Likes
Similar Threads
Threaded Mode
