This CSC issue everyone talks about....

-ZS-Carpenter · 05-11-2019, 02:42 PM

Quote:

Originally Posted by Spooler

Gravity baby.... The fluid moves so fast out of it you don't need a bleeder. Just don't goof up and let the master cylinder run dry. Always keep some fluid at the bottom of the reservoir. Once I get it the fluid down to the bottom I wipe clean and re-fill and do it again. You'll see the fluid start to come out good and clean at the CSC.

I'll give that a shot when I get home. Thanks!

Sent from my SM-G965U using Tapatalk

Rusty · 05-11-2019, 03:38 PM

Quote:

Originally Posted by -ZS-Carpenter

I'll give that a shot when I get home. Thanks!

Sent from my SM-G965U using Tapatalk

Before you do it. Take a syringe to suck out the reservoir. Then use a paper towel it wipe it clean. Be surprise at the junk on the towel after you it do. Then refill with fresh fluid. Now do your flush.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Epic ricer talks about his twin turbo 370z	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	73	02-24-2010 04:40 PM
Ok - So howcome there are no spacer talks for the Z?	shabarivas	Intake/Exhaust	6	08-25-2009 02:06 PM
Corner Balancing - Why No One Talks about it????	cab83_750	Brakes & Suspension	15	07-13-2009 04:49 PM