This CSC issue everyone talks about....

Sway · 05-10-2019, 06:57 PM

When I replaced my clutch I replaced my csc with a zspeed heavy duty and my master cyl at the same time. How bad is it when it fails? Not that bad, it’s just like you don’t have a clutch... at all.

Rusty · 05-10-2019, 11:14 PM

I have 36,000 miles on my Z. And yes, I beat on it. Still have the OEM set-up. Had no issues yet. Have the clutch line wrapped with insulation down by the exhaust pipe to keep the heat away. And replaced the stock fluid with Motul 600 brake fluid. I'm not counting on it to last. So my next winter project with be a Tilton lightweight 5.5 lb clutch/pressure plate, flywheel, with the CMAK, RJM pedal and a Tilton master cylinder. Changing the shifter from a TWM to a Coolerworx.

Sway · 05-11-2019, 08:42 AM

Quote:

Originally Posted by Rusty

I have 36,000 miles on my Z. And yes, I beat on it. Still have the OEM set-up. Had no issues yet. Have the clutch line wrapped with insulation down by the exhaust pipe to keep the heat away. And replaced the stock fluid with Motul 600 brake fluid. I'm not counting on it to last. So my next winter project with be a Tilton lightweight 5.5 lb clutch/pressure plate, flywheel, with the CMAK, RJM pedal and a Tilton master cylinder. Changing the shifter from a TWM to a Coolerworx.

What’s wrong with the TWM? I’m a fan of mine

cv129 · 05-11-2019, 10:36 AM

Quote:

Originally Posted by Sway

What’s wrong with the TWM? I’m a fan of mine

Coolerworx shifter

Check this post out and you’ll see.

Rusty · 05-11-2019, 02:01 PM

Quote:

Originally Posted by Sway

What’s wrong with the TWM? I’m a fan of mine

Try something different.

05-10-2019, 06:57 PM	#1 (permalink)
Sway Track Member Join Date: Sep 2012 Location: TX Posts: 697 Drives: 2018 GTR Rep Power: 37873	When I replaced my clutch I replaced my csc with a zspeed heavy duty and my master cyl at the same time. How bad is it when it fails? Not that bad, it’s just like you don’t have a clutch... at all. sx moneypit and BettyZ like this. __________________ - White 2018 GTR FBO+E85 - Check out my old build thread: Sway’s Journal-Hitomi ~Live and let live!~

05-10-2019, 11:14 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,585 Drives: 2011 Nismo GM 6M Rep Power: 2684440	I have 36,000 miles on my Z. And yes, I beat on it. Still have the OEM set-up. Had no issues yet. Have the clutch line wrapped with insulation down by the exhaust pipe to keep the heat away. And replaced the stock fluid with Motul 600 brake fluid. I'm not counting on it to last. So my next winter project with be a Tilton lightweight 5.5 lb clutch/pressure plate, flywheel, with the CMAK, RJM pedal and a Tilton master cylinder. Changing the shifter from a TWM to a Coolerworx. NISMO IX, ZontheRocks and Zingston like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Epic ricer talks about his twin turbo 370z	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	73	02-24-2010 05:40 PM
Ok - So howcome there are no spacer talks for the Z?	shabarivas	Intake/Exhaust	6	08-25-2009 03:06 PM
Corner Balancing - Why No One Talks about it????	cab83_750	Brakes & Suspension	15	07-13-2009 05:49 PM