Clutch & Flywheel advice please

axmea? · 09-01-2017, 10:59 PM

Quote:

Originally Posted by Quicksilvers

Z Speed Performance Quiet Design Stage 2 clutch,Nodular Iron 26 lb. steel flywheel, Z Speed Performace CMAK or heavy duty slave cylinder would be good choices. Also the Z Speed Performance Quiet Design Stage 2 clutch will more life and longevity than the Z Speed Performance Stage 1 OEM replacement clutch.

What is long life?

Quicksilvers · 09-19-2017, 12:04 AM

Quote:

Originally Posted by axmea?

What is long life?

Depends really on how you use your Nissan 370Z? Street driven? Open track events? Time attack? Drag strip?

axmea? · 09-19-2017, 01:14 AM

Quote:

Originally Posted by Quicksilvers

Depends really on how you use your Nissan 370Z? Street driven? Open track events? Time attack? Drag strip?

Exactly my point.

miguelruiz064 · 09-20-2017, 06:38 AM

Nissan apparently finally fixed the CSC issue in 2018 with the Exide clutch and a softer pressure plate, so if you can find one in stock go for it.

I'm not a fan of the CSC delete kit. Every single modern manual car uses a concentric slave cylinder; going to the external slave cylinder seems backwards to me but hey, it works; if you like this design better it's only a matter of taste.

So in typical Nissan fashion, they could have redesigned the CSC years ago, or use a pressure plate that put less load on the old design. Granted, to compensate they used a clutch disc that has more grip.

JARblue · 09-20-2017, 08:08 AM

Quote:

Originally Posted by miguelruiz064

Nissan apparently finally fixed the CSC issue in 2018 with the Exide clutch and a softer pressure plate, so if you can find one in stock go for it.

I call

They didn't change the shitty design of the CSC. I don't believe a softer pressure plate is going to change jack. That rubber lining is not going stand up. I'll believe it when I hear the majority of 2018 owners did not have to change their CSC before their clutch.

Quote:

Originally Posted by miguelruiz064

I'm not a fan of the CSC delete kit. Every single modern manual car uses a concentric slave cylinder; going to the external slave cylinder seems backwards to me but hey, it works; if you like this design better it's only a matter of taste.

So get the ZSpeed or Tilton heavy duty internal. It's not like a delete kit is the only aftermarket option.

Quote:

Originally Posted by miguelruiz064

So in typical Nissan fashion, they could have redesigned the CSC years ago, or use a pressure plate that put less load on the old design. Granted, to compensate they used a clutch disc that has more grip.

Until more people hold them accountable and stop just shelling out the money when something like CSC failure happens, Nissan will continue to operate like every other car manufacturer where the only thing that matters is profit. It seems the consumers are the ones who have to force a recall in this situation.

Joe@ZSpeed · 09-20-2017, 10:38 AM

I have the 2018+ clutch sitting here, A WHOPPING 1700lb clamp load with a 240mm disk, This is pretty weak... Even our stage one kit has 2,000lbs of clamp load and a 250mm disk.

And they are still using the same plastic concentric slave as before.

The only thing I like about it is they got rid of the junk self adjusting LUK pressure plate and went back to a standard Exedy pressure plate.

Quote:

Originally Posted by JARblue

I call

They didn't change the shitty design of the CSC. I don't believe a softer pressure plate is going to change jack. That rubber lining is not going stand up. I'll believe it when I hear the majority of 2018 owners did not have to change their CSC before their clutch.

So get the ZSpeed or Tilton heavy duty internal. It's not like a delete kit is the only aftermarket option.

Until more people hold them accountable and stop just shelling out the money when something like CSC failure happens, Nissan will continue to operate like every other car manufacturer where the only thing that matters is profit. It seems the consumers are the ones who have to force a recall in this situation.

B&W_Evader · 09-20-2017, 11:51 AM

Joe, Is your EXEDY kit the 6807 or the 06809FWHD?

09-20-2017, 11:51 AM	#7 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 388	Joe, Is your EXEDY kit the 6807 or the 06809FWHD? __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch, Flywheel, and Diffy Super Sale: JWT\|Southbend\|Clutch Masters\|Spec\|Quaife\|ATS	Kyle(Houston)	Drivetrain/Engine	755	12-15-2019 09:11 PM
GT//Monsters Clutch Kits Flywheel Shop - Clutch Master \|\| Competition Clutch \|\| SPEC	gtmonsters	Drivetrain/Engine	189	10-30-2015 11:41 PM
[FOR SALE] JWT Clutch/Flywheel Combo Nissan 370Z 09+ Z34 & CSC w/ SS Clutch Line	R0bDC	Parts for sale (Private Classifieds)	2	08-16-2015 01:46 PM
[FOR SALE] JWT Clutch & Flywheel combo with SS clutch line	DEpointfive0	Parts for sale (Private Classifieds)	10	10-31-2014 11:53 AM
JWT Clutch&Flywheel VS Nismo Clutch&Flywheel	hyunsoo1803	Engine & Drivetrain	3	05-05-2011 07:57 PM

09-20-2017, 06:38 AM	#4 (permalink)
miguelruiz064 Base Member Join Date: Jun 2014 Location: Detroit Posts: 7 Drives: 370z M6 Rep Power: 12	Nissan apparently finally fixed the CSC issue in 2018 with the Exide clutch and a softer pressure plate, so if you can find one in stock go for it. I'm not a fan of the CSC delete kit. Every single modern manual car uses a concentric slave cylinder; going to the external slave cylinder seems backwards to me but hey, it works; if you like this design better it's only a matter of taste. So in typical Nissan fashion, they could have redesigned the CSC years ago, or use a pressure plate that put less load on the old design. Granted, to compensate they used a clutch disc that has more grip.