Quaife LSD Headache

Bswanny · 12-08-2019, 12:28 PM

Quote:

Originally Posted by Rusty

Like Spooler said. Get the stub shaft from Z1. Make sure what type of stub to cv joint bolting you have. Bolted or through bolt with nut.

It the picture. You can see the stock stubs on the left and center. The Z1 stub on the right. Notice the location of the snap ring grooves. This is important. This holds your sub axle in place. If you cut off the stock stub. You run the risk of the stub coming out. The right stub replaces the sub in the center.

Okay I believe I have unthreaded given the year but will know when I get it off. So was the one on the left the cut stub? I was wanting to use OEM shafts as the Z1 products I bought in the past have broken and was not thrilled with the quality.

Sent from my SM-G965U1 using Tapatalk

Rusty · 12-08-2019, 01:30 PM

Quote:

Originally Posted by Bswanny

Okay I believe I have unthreaded given the year but will know when I get it off. So was the one on the left the cut stub? I was wanting to use OEM shafts as the Z1 products I bought in the past have broken and was not thrilled with the quality.

Sent from my SM-G965U1 using Tapatalk

The left and center are the OEM stub out of my diff. The shiny one on the right is the one I got from Z1. The one on the left is uncut.

Bryzed · 04-05-2020, 02:28 AM

Quote:

Originally Posted by Rusty

The left and center are the OEM stub out of my diff. The shiny one on the right is the one I got from Z1. The one on the left is uncut.

Hey rusty, just wondered if you could clear something up for me. I noticed in your pic of the three stub axles ,that the one you bought from z1 for your OS Giken diff is short like your Oem LH stub axle but the Z1 axle is tapered and yours is flat ! I thought if fitting an OS Giken diff to a VLSD equipped 370z you just needed to buy another LH short stub axle so you’d end up with 2 short non tapered axles for a VLSD equipped 370z but seeing your pic has me confused.

Rusty · 04-05-2020, 11:08 AM

Quote:

Originally Posted by Bryzed

Hey rusty, just wondered if you could clear something up for me. I noticed in your pic of the three stub axles ,that the one you bought from z1 for your OS Giken diff is short like your Oem LH stub axle but the Z1 axle is tapered and yours is flat ! I thought if fitting an OS Giken diff to a VLSD equipped 370z you just needed to buy another LH short stub axle so you’d end up with 2 short non tapered axles for a VLSD equipped 370z but seeing your pic has me confused.

I bought my OS Giken from MAM. I e-mailed them that I needed a new stub axle. They got the axle from Z1 and shipped it to me. It works.

Spooler · 04-05-2020, 12:14 PM

Quote:

Originally Posted by Rusty

I bought my OS Giken from MAM. I e-mailed them that I needed a new stub axle. They got the axle from Z1 and shipped it to me. It works.

Rusty, those pics you posted show threaded holes for the axles. This is one of those variances I have posted about. The pic that Jarblue post is a none threaded one that you have to bolt through. The bolt through axles are also what you need for the DSS pro level axles. There are so many variables it is hard to keep track.

Rusty · 04-05-2020, 12:21 PM

Quote:

Originally Posted by Spooler

Rusty, those pics you posted show threaded holes for the axles. This is one of those variances I have posted about. The pic that Jarblue post is a none threaded one that you have to bolt through. The bolt through axles are also what you need for the DSS pro level axles. There are so many variables it is hard to keep track.

Really.

Important things are the axle bolt hole style and the stub axle snap ring location is the same as the short oem.

JARblue · 04-05-2020, 10:47 PM

Quote:

Originally Posted by Rusty

Really.

Important things are the axle bolt hole style and the stub axle snap ring location is the same as the short oem.

The taper really doesn't matter - I was kidding in my post about the wrong part.

I've talked to a couple of guys that used the bolt-thru stub axle that I linked with their threaded axles. Said there was no problems using it, although I didn't get any specifics like whether they had to clean out the threaded holes or what.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone running Quaife LSD?	jaedub	Engine & Drivetrain	41	07-01-2017 05:59 PM
[WTB] 7at LSD (prefer Quaife)	JenovaI	Parts for sale (Private Classifieds)	5	05-24-2016 09:17 PM
Quaife LSD	bulldog82098	Engine & Drivetrain	5	10-15-2014 08:03 AM
Quaife LSD in 7AT	Eighties Meta	Engine & Drivetrain	11	03-22-2013 08:02 PM
Quaife LSD	aadosx	Engine & Drivetrain	27	06-20-2012 09:14 AM