RJ MFG New Oil Pump Gears (Rev to 9k!!!)

Z eliminator · 07-23-2016, 10:07 PM

has mine been shipped yet ?

Z

RJ MFG · 07-25-2016, 01:21 AM

All orders have shipped.

Elmo370z · 07-30-2016, 02:29 AM

Out of all the folks on here who will be purchasing these gears, who here will be revving past 8 grand ( either it be drag racing, 1/2 mile racing, or road racing) and for the folks that do will you still retain the oem valve-train or upgrading to handle to higher RPM's?

RJ MFG · 08-25-2016, 08:45 AM

UPDATE:

So we had the opportunity to put the first car on the dyno with our Oil Pump Gears. As many of you are aware a fellow member had a mishap with a certain dealer earlier this year that caught his car on fire. Well he sent us his car to fix the electrical issues and to do some minor upgrades.

This is a stock motor car in every way shape and form. The car is running an older GEN1 6266 single turbo kit with ID1000 and walbro 255 and a single 3" exhaust. We decided to upgrade his Oil pump gears and upgrade to the RJM GTR intake manifold conversion. The outcome was AWESOME!

Given this car is a 91oct tuned car our power limits, timing advance and rpms had to be limited. However, we were successful at running back to back 8100rpm runs gaining nearly 40 whp and similar torque over the previous setup. The car made power up until 8100rpms and we stopped there due to the limitations of the 91 oct.

Our final numbers were done on a "heartbreaker" dyno that is notorious for reading low. We started tuning earlier in the morning focusing on his driveability tune and by the time we got to power runs it was mid day and the temps in the dyno booth reached 110*F and coupled with the high humidity in florida we had our work cut out for us! Given more favorable conditions I believe we could see more power. The numbers were as follows:

8100RPM Limit
542whp
401ft/lbs
9psi waste gate pressure
91 oct

If you visit our facebook page you can get a behind the scenes video of the last dyno run. We will be publishing a full feature video of the car soon but this is great news for even the 91 octane customers.

RJ MFG Team

07-23-2016, 10:07 PM	#91 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	has mine been shipped yet ? Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

07-25-2016, 01:21 AM	#92 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	All orders have shipped. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

08-25-2016, 08:45 AM	#94 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	UPDATE: So we had the opportunity to put the first car on the dyno with our Oil Pump Gears. As many of you are aware a fellow member had a mishap with a certain dealer earlier this year that caught his car on fire. Well he sent us his car to fix the electrical issues and to do some minor upgrades. This is a stock motor car in every way shape and form. The car is running an older GEN1 6266 single turbo kit with ID1000 and walbro 255 and a single 3" exhaust. We decided to upgrade his Oil pump gears and upgrade to the RJM GTR intake manifold conversion. The outcome was AWESOME! Given this car is a 91oct tuned car our power limits, timing advance and rpms had to be limited. However, we were successful at running back to back 8100rpm runs gaining nearly 40 whp and similar torque over the previous setup. The car made power up until 8100rpms and we stopped there due to the limitations of the 91 oct. Our final numbers were done on a "heartbreaker" dyno that is notorious for reading low. We started tuning earlier in the morning focusing on his driveability tune and by the time we got to power runs it was mid day and the temps in the dyno booth reached 110*F and coupled with the high humidity in florida we had our work cut out for us! Given more favorable conditions I believe we could see more power. The numbers were as follows: 8100RPM Limit 542whp 401ft/lbs 9psi waste gate pressure 91 oct If you visit our facebook page you can get a behind the scenes video of the last dyno run. We will be publishing a full feature video of the car soon but this is great news for even the 91 octane customers. RJ MFG Team SS_Firehawk and Rusty like this. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Billet Oil Pump Gears and Backing Plate - Group Buy Interest??	phunk	Engine & Drivetrain	225	02-17-2017 09:02 PM
[WTB] SWAP SOCAL: 4.08 gears for 3.9 or 3.69 Gears	kosstick	Parts for sale (Private Classifieds)	26	09-24-2016 09:35 PM
[WTB] oil pump	Z eliminator	Parts for sale (Private Classifieds)	0	01-21-2015 05:17 PM
[FOR SALE] Walbro 255 Lph Fuel Pump (PUMP ONLY)	Nism0	Parts for sale (Private Classifieds)	8	08-18-2013 03:23 PM

07-30-2016, 02:29 AM	#93 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Out of all the folks on here who will be purchasing these gears, who here will be revving past 8 grand ( either it be drag racing, 1/2 mile racing, or road racing) and for the folks that do will you still retain the oem valve-train or upgrading to handle to higher RPM's?