![]() |
I will be running my 4.5 stroker N/A with full bolt on's the Block is at Darton now being sleeved now. The heads are done and my Jun cams should
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#11 (permalink) |
A True Z Fanatic
Join Date: Jul 2009
Location: Ontario Canada
Posts: 1,660
Drives: 370 Z 7AT Sports
Rep Power: 20 ![]() |
![]()
I will be running my 4.5 stroker N/A with full bolt on's
the Block is at Darton now being sleeved now. The heads are done and my Jun cams should be installed in them, stage 3 GTM Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT. 11.1 comp, 3200 rpm stall torque converter will dyno with the M370 intake and the factory intake as well. Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264 I have the GTM stage 2 SC going on after the 1/4 mile runs. it should run 11.87 N/A, 10.92 with the SC it should be on the road late summer Its not being built by Gamma, but by the company who designed the stroker for GTM. Z
__________________
![]() Last edited by Z eliminator; 02-07-2017 at 08:44 AM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
OEM Denso VQ37VHR Fuel injector Flow Test results | MILENKOGT | Engine & Drivetrain | 13 | 08-30-2015 04:52 PM |
GTM Stage 2 Supercharger Preliminary Testing Results | SAM@GTM | Forced Induction | 576 | 01-15-2014 09:40 PM |
Uprev Tuned at Z1, results inside :) | '10Anamoly | Tuning | 12 | 01-01-2012 12:32 PM |
1/4 mile results inside | ZforMe | Track / Autocross / Drifting / Dragstrip | 32 | 04-24-2009 07:27 AM |
Knock on the VQ37VHR - gear heads step inside | BerkTech | Intake/Exhaust | 39 | 04-13-2009 10:37 AM |