Jim Wolf Cam testing for the VQ37VHR -- Results inside!

Mysilverz · 12-08-2015, 09:15 AM

TiTs good to hear that it idles like stock.

Dahawkster · 12-11-2015, 12:17 PM

Does the motor really need to be taken out? I feel like I could do that install with the motor still in the car, does anybody have any experience with head work without removing the motor please chime in. I would lIke a mod like this but that install looks kind of crazy.

MAMotorsports · 12-11-2015, 01:41 PM

So I found a real crappy video from after we put them in. Hit up the customer to see if he can stop by one of these days.

As for doing it in the car, we have done it. Saves you MAYBE 2 hours, and adds a large amount more curse words, and anger. 100% worth it to pull the engine.

Its best to pair it with other parts, long tubes are a good example as installing those with the cradle dropped is much easier also.

brucelidat · 12-11-2015, 01:43 PM

I'm waiting for stage 2 to see the gains and how that sounds and also for a new manifold to go with and maximize it.

PongSanity · 12-11-2015, 02:36 PM

This mod would get done when I'm ready to drop a built motor in. If I was staying N/A though, this mod would've been very convincing to get done during tax refund season.... Torque wins races. HP wins trophies.

Spooler · 12-11-2015, 09:34 PM

Quote:

Originally Posted by MAMotorsports

So I found a real crappy video from after we put them in. Hit up the customer to see if he can stop by one of these days.

As for doing it in the car, we have done it. Saves you MAYBE 2 hours, and adds a large amount more curse words, and anger. 100% worth it to pull the engine.

Its best to pair it with other parts, long tubes are a good example as installing those with the cradle dropped is much easier also.

It looks like a 12-15hr job to do it in the car.

Dahawkster · 12-12-2015, 01:54 AM

Damn I wish the install wasnt so crazy.

MAMotorsports · 12-14-2015, 08:48 AM

Quote:

Originally Posted by Spooler

It looks like a 12-15hr job to do it in the car.

Its possible for sure, but, this is a job that you really really really want to take your time on. I have a tech here that has done this many times, and I would still be hesitant to say 15hrs for it in car. We just did one last week, and id say he had about 18hrs into it (This would be his 7th time id say)

Should have a car in this week to grab a video of idle!

Spooler · 12-14-2015, 11:42 AM

Quote:

Originally Posted by MAMotorsports

Its possible for sure, but, this is a job that you really really really want to take your time on. I have a tech here that has done this many times, and I would still be hesitant to say 15hrs for it in car. We just did one last week, and id say he had about 18hrs into it (This would be his 7th time id say)

Should have a car in this week to grab a video of idle!

Just thinking about it makes my shoulders hurt again. Holding air tools above your head most of the day sucks.

Elmo370z · 12-14-2015, 11:45 AM

Quote:

Originally Posted by MAMotorsports

Its possible for sure, but, this is a job that you really really really want to take your time on. I have a tech here that has done this many times, and I would still be hesitant to say 15hrs for it in car. We just did one last week, and id say he had about 18hrs into it (This would be his 7th time id say)

Should have a car in this week to grab a video of idle!

Wish i still lived in MD, You guys woud have my business installing the cam

ANMVQ · 01-21-2016, 06:31 PM

Anything happen with this , vid , dyno ?

MAMotorsports · 01-22-2016, 08:59 AM

Quote:

Originally Posted by ANMVQ

Anything happen with this , vid , dyno ?

Sent the Idle video out to a few people, I guess I forgot to post it up in here!

This is a built motor, with the C1 cams, and a Fast Intentions Stage2 Turbo Kit.

This is a Dyno Graph from a bone stock 370Z with the Cams

chuckie311 · 01-22-2016, 09:27 AM

cant even tell there is a cam in it!!
How is stage 2 coming along.. any updates

ANMVQ · 01-22-2016, 11:06 AM

Quote:

Originally Posted by MAMotorsports

Sent the Idle video out to a few people, I guess I forgot to post it up in here!

This is a built motor, with the C1 cams, and a Fast Intentions Stage2 Turbo Kit.

This is a Dyno Graph from a bone stock 370Z with the Cams

I might have to put these on my list, Too bad you guys are so FAR away. That's no tune either ??

Eclipz · 01-22-2016, 11:16 AM

Nice, these must be a better option than Jun cams for sure.

12-11-2015, 12:17 PM	#77 (permalink)
Dahawkster Base Member Join Date: May 2015 Location: Hawaii Posts: 71 Drives: 09 370z 6sp sprt pkg Rep Power: 9	Does the motor really need to be taken out? I feel like I could do that install with the motor still in the car, does anybody have any experience with head work without removing the motor please chime in. I would lIke a mod like this but that install looks kind of crazy. Spartan 1771 likes this.

12-11-2015, 01:41 PM	#78 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 16	So I found a real crappy video from after we put them in. Hit up the customer to see if he can stop by one of these days. As for doing it in the car, we have done it. Saves you MAYBE 2 hours, and adds a large amount more curse words, and anger. 100% worth it to pull the engine. Its best to pair it with other parts, long tubes are a good example as installing those with the cradle dropped is much easier also. Elmo370z likes this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

12-11-2015, 01:43 PM	#79 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	I'm waiting for stage 2 to see the gains and how that sounds and also for a new manifold to go with and maximize it. Elmo370z likes this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

12-11-2015, 02:36 PM	#80 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 10	This mod would get done when I'm ready to drop a built motor in. If I was staying N/A though, this mod would've been very convincing to get done during tax refund season.... Torque wins races. HP wins trophies. Spartan 1771 likes this.

01-21-2016, 06:31 PM	#86 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Anything happen with this , vid , dyno ? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-08-2015, 09:15 AM	#76 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 9	TiTs good to hear that it idles like stock.

12-12-2015, 01:54 AM	#82 (permalink)
Dahawkster Base Member Join Date: May 2015 Location: Hawaii Posts: 71 Drives: 09 370z 6sp sprt pkg Rep Power: 9	Damn I wish the install wasnt so crazy.

01-22-2016, 09:27 AM	#88 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	cant even tell there is a cam in it!! How is stage 2 coming along.. any updates __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

01-22-2016, 11:16 AM	#90 (permalink)
Eclipz Enthusiast Member Join Date: Dec 2013 Location: Tampa Posts: 360 Drives: 06 Eclipse GS Rep Power: 11	Nice, these must be a better option than Jun cams for sure.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM