Ultimate Z1 Header thread

chuckie311 · 10-12-2015, 09:56 PM

no change in mods.. that dyno that was done today is no tune..we were getting a baseline for when we dyno tomorrow with headers and berks HFC..we are getting true numbers on if the headers and hfc make power over stock headers

370Z JT · 10-12-2015, 10:44 PM

Cool! I really hope you get your goal of +20 WHP tomorrow. best of luck.

GZ3 · 10-13-2015, 08:47 AM

sweet ready for updates

chuckie311 · 10-13-2015, 01:29 PM

Parts just arrived Seb is working on it now will update in a few hours with some numbers

chuckie311 · 10-13-2015, 02:45 PM

Here are the results 307whp and 237 wtq no tune

370Z JT · 10-13-2015, 02:56 PM

Nice so far!! Mind I ask how long was the install for the shorties?

Sent from my Nexus 6 using Tapatalk

Mysilverz · 10-13-2015, 03:04 PM

Would you mind posting some of the graphs for comparison. Id love to see where the powers being made and if there's any lose in the lower rpm band.

chuckie311 · 10-13-2015, 03:38 PM

I'll have Seb email me the files when we are done most of the power was all top end
It took Seb 4 hours to install them

GZ3 · 10-13-2015, 04:54 PM

When is the ecutek tuning coming

chuckie311 · 10-13-2015, 06:07 PM

I'll post dynos tonight when I get back home.. But I can tell you the switch to ECUTEK is worth it.. The throttle response is 100 times better than uprev

chuckie311 · 10-13-2015, 06:11 PM

I gained through out the entire power band with ECUTEK but only 3 on the top end so 310whp

370Z JT · 10-13-2015, 06:18 PM

291 to 310...not bad at all.

SS_Firehawk · 10-13-2015, 07:59 PM

Are the collectors 2.5" when mating to the cat or TP?

GZ3 · 10-13-2015, 08:05 PM

Not bad not bad....looking forward to the dyno plot... I may skip headers and do art pipes

chuckie311 · 10-13-2015, 09:18 PM

here it is
Red is stock header Gen3 Berk HFC Ark Ported Plenum 4.08 gears no tune
Blue is Z1 Headers Gen3 Berk HFC Ark Ported Plenum 4.08 gears no tune
Green is ECUTEK tune Z1 headers Gen3 Berk HFC Ark Ported Plenum 4.08 gears

10-12-2015, 09:56 PM	#46 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	no change in mods.. that dyno that was done today is no tune..we were getting a baseline for when we dyno tomorrow with headers and berks HFC..we are getting true numbers on if the headers and hfc make power over stock headers __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

10-12-2015, 10:44 PM	#47 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Cool! I really hope you get your goal of +20 WHP tomorrow. best of luck. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-13-2015, 08:47 AM	#48 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 21	sweet ready for updates __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

10-13-2015, 01:29 PM	#49 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	Parts just arrived Seb is working on it now will update in a few hours with some numbers __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

10-13-2015, 02:45 PM	#50 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	Here are the results 307whp and 237 wtq no tune 370Z JT likes this. __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

10-13-2015, 02:56 PM	#51 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Nice so far!! Mind I ask how long was the install for the shorties? Sent from my Nexus 6 using Tapatalk __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-13-2015, 03:04 PM	#52 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 9	Would you mind posting some of the graphs for comparison. Id love to see where the powers being made and if there's any lose in the lower rpm band.

10-13-2015, 03:38 PM	#53 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	I'll have Seb email me the files when we are done most of the power was all top end It took Seb 4 hours to install them Mysilverz likes this. __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

10-13-2015, 04:54 PM	#54 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 21	When is the ecutek tuning coming __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

10-13-2015, 06:07 PM	#55 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	I'll post dynos tonight when I get back home.. But I can tell you the switch to ECUTEK is worth it.. The throttle response is 100 times better than uprev __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

10-13-2015, 06:11 PM	#56 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	I gained through out the entire power band with ECUTEK but only 3 on the top end so 310whp 370Z JT likes this. __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

10-13-2015, 06:18 PM	#57 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	291 to 310...not bad at all. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-13-2015, 07:59 PM	#58 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	Are the collectors 2.5" when mating to the cat or TP? __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

10-13-2015, 08:05 PM	#59 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 21	Not bad not bad....looking forward to the dyno plot... I may skip headers and do art pipes __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

10-13-2015, 09:18 PM	#60 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	here it is Red is stock header Gen3 Berk HFC Ark Ported Plenum 4.08 gears no tune Blue is Z1 Headers Gen3 Berk HFC Ark Ported Plenum 4.08 gears no tune Green is ECUTEK tune Z1 headers Gen3 Berk HFC Ark Ported Plenum 4.08 gears Mysilverz likes this. __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CJM: Ultimate 370z Fuel Pump Thread	phunk	Forced Induction	87	03-25-2023 05:35 PM
The Ultimate Test Pipes and High Flow Cats Thread!! Berk, AAM, Invidia and More!!	Mike@Czp	Exhaust/Intake	246	11-06-2017 02:04 PM
** ULTIMATE Brake Replacement Thread \| Free Shipping \| Stoptech Centric Power	THMotorsports	Suspension/Brakes	906	04-20-2015 04:35 PM
WTB: OEM Header	second2none	Wanted	2	10-17-2012 08:00 PM
Post your ultimate street dork pics thread	gsxr750	The Lounge (Off Topic)	1	01-25-2012 06:44 PM