|
a DIY? Lol Take it to a shop IF you have NO knowledge/space or the correct tools as this is something a person with no experience should be doing without
|
|||||||
14Likes
|
|
LinkBack | Thread Tools | Display Modes |
07-06-2015, 10:03 AM
|
#2 (permalink) |
|
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,732
Drives: 🔰
Rep Power: 10   |
a DIY? Lol
Take it to a shop IF you have NO knowledge/space or the correct tools as this is something a person with no experience should be doing without some knowledgable/physical help. But if you're going for it? Be warned it's going to be a PIA. Moving forward make sure you disconnect EVERYTHING thats attached to the engine from body before you decide to yank the motor out including last but not least? The motor mounts/exhaust/bell housing to the transmission. Tag and take pics so you have a reference and reverse the procedure when you're installing. Again seriously if you have no clue or the right tools get someone that does. This is not a typical DiY project.
__________________
  |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Engine removal cost | zefaulter | Engine & Drivetrain | 16 | 06-29-2015 11:43 PM |
| Pop up Engine Hood indicator - After bumper removal | AH370Z | Nissan 370Z General Discussions | 15 | 06-13-2011 11:01 AM |
| Difficulty shifting from 2nd to 3rd? | Z-WHIZ | Nissan 370Z General Discussions | 5 | 10-09-2009 09:16 PM |
| Lower Engine Panel Removal Opinions? | CCCLXXZ | Nissan 370Z General Discussions | 5 | 08-25-2009 07:36 PM |
Threaded Mode
