a DIY? Lol
Take it to a shop IF you have NO knowledge/space or the correct tools as this is something a person with no experience should be doing without some knowledgable/physical help.
But if you're going for it? Be warned it's going to be a PIA.
Moving forward make sure you disconnect EVERYTHING thats attached to the engine from body before you decide to yank the motor out including last but not least?
The motor mounts/exhaust/bell housing to the transmission.
Tag and take pics so you have a reference and reverse the procedure when you're installing.
Again seriously if you have no clue or the right tools get someone that does.
This is not a typical DiY project.
|