|
I personally like to take them out compleatly its pretty easy. Make sure the engine is not hot so coolant does not splash out of the lines. I used CRC
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-14-2015, 10:42 PM
|
#9 (permalink) |
|
Base Member
Join Date: Jan 2013
Location: Mount prospect
Posts: 2
Drives: 2011 370z manual
Rep Power: 14  |
I personally like to take them out compleatly its pretty easy. Make sure the engine is not hot so coolant does not splash out of the lines. I used CRC TB cleaner and a rag (you will need to do a little scrubing not just spray the cleaner). Make sure not to move around the flap too much, just hold it open all tne time. There is 2 hoses, 1 connector, and 4 fasteners (15mm hex if i remember right).
 I hope thats helpful
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Little issue at idle.. | pty370z | Engine & Drivetrain | 43 | 08-31-2015 11:23 PM |
| idle @ 500 | johncarlopang | Nissan 370Z General Discussions | 15 | 04-13-2014 10:13 PM |
| engine rpm drop at idle? | Cell | Engine & Drivetrain | 24 | 10-13-2013 11:49 AM |
| Rattle at idle? | pandacheese | Engine & Drivetrain | 4 | 01-10-2012 11:59 PM |
| how to have a loud idle? | 370zz | Intake/Exhaust | 21 | 12-30-2011 09:23 AM |
3Likes
Threaded Mode
