IPP JWT Clutch and Flywheel Combo with FREE Accessories

Minicobra1 · 03-01-2009, 05:07 AM

Quote:

Originally Posted by Kyle(Houston)

From what I have heard the Rev match works just like it did with the stock flywheel. The revs are faster and the motor responds quicker

The only negative I have heard is the noise from going from a dual mass flywheel to the single light weight flywheel. You will get some chatter and noise but the benefit from the quicker revs and shifting far out weighs the slight noise increase

Wow, I was hoping it would eliminate some noise

Mine sounds like an F'N cement mixer and I have the clunk and chatter when pushing in the clutch from 1st to 2nd or if I"m cruising a parking lot or stop and go traffic, while in first if I push the clutch in. Taken it to the dealer, and they are telling me that it's normal,

haven't went to another dealer yet for a 2nd opinion. Really takes the fun out of driving the car, if I push the clutch in really slowly it doesn't make the clunk sound. Could this be the Hydraulic throw out bearing??

Kyle(Houston) · 03-01-2009, 10:09 AM

Quote:

Originally Posted by Minicobra1

Wow, I was hoping it would eliminate some noise

Mine sounds like an F'N cement mixer and I have the clunk and chatter when pushing in the clutch from 1st to 2nd or if I"m cruising a parking lot or stop and go traffic, while in first if I push the clutch in. Taken it to the dealer, and they are telling me that it's normal,

haven't went to another dealer yet for a 2nd opinion. Really takes the fun out of driving the car, if I push the clutch in really slowly it doesn't make the clunk sound. Could this be the Hydraulic throw out bearing??

Yeah the clunk is not normal at all. That might be a throw out bearing or maybe even a loose mount when they put it back together.

The cement mixer is normal and will get better over time

zoltan370z · 06-19-2009, 12:58 PM

Quote:

Originally Posted by Minicobra1

Wow, I was hoping it would eliminate some noise

Mine sounds like an F'N cement mixer and I have the clunk and chatter when pushing in the clutch from 1st to 2nd or if I"m cruising a parking lot or stop and go traffic, while in first if I push the clutch in. Taken it to the dealer, and they are telling me that it's normal,

haven't went to another dealer yet for a 2nd opinion. Really takes the fun out of driving the car, if I push the clutch in really slowly it doesn't make the clunk sound. Could this be the Hydraulic throw out bearing??

I'm with minicobra. F**k all that clutch chatter. I came from an 06 mustang gt with a centerforce dual friction, and it didn't make nearly as much noise as the STOCK clutch and flywheel on the 370z. And dual frictions are known for noise. Make a quieter clutch and flywheel setup and maybe we can talk.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DDMotorsports: JWT Clutch & Flywheel	M.Bonanni	Engine & Drivetrain	12	11-04-2009 06:21 AM
Nissan Fairlady Z (370z) Dealer options/accessories list	AK370Z	Nissan 370Z General Discussions	47	08-29-2009 02:36 PM
Monterey Blue and Persimmon Interior Combo! Finally Seen--Pics!!!	SMcK23	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	07-20-2009 11:07 AM
New 370z parts & accessories, at the 370zsource!!!!!	Michael@TheZStore	TheZStore	10	02-13-2009 10:04 AM
370Z Clutch vs. 350Z Clutch	cheeyo	Nissan 370Z General Discussions	8	01-28-2009 05:48 PM