Z1 Motorsports: Clutch Concentric Slave Cylinder Elimination Kit

John@Z1 · 03-14-2014, 08:47 AM

Z1 Motorsports Clutch Concentric Slave Cylinder Elimination Kit

With over a year in development and testing, Z1 Motorsports is now proud to offer a comprehensive, bolt on solution to the OEM clutch concentric slave cylinder for cars equipped with manual transmissions mated to VQ35HR and VQ37VHR engines. Thorough analysis and modeling of the factory clutch system's dynamics led to the development of an innovative kit that completely eliminates the failure-prone concentric unit, replacing it instead with a traditional release bearing mated to a Howe Racing pull-type slave cylinder.
Due to the repeated exposure to high temperatures and the high operating pressure of the factory concentric system, it has been considered a weak point of the HR+ platform’s revised drivetrain. These failures are definite, and the symptoms obvious; whether it’s pushing the limits on the track, driving hard on backroads, or simply commuting – if the clutch pedal sinks to the floor during a shift and doesn’t return, the concentric slave cylinder is the likely culprit.
Armed with an extensive list of design goals, product requirements, and functional benchmarks, the only solution was a no compromises approach. The Z1 Motorsports Concentric Slave Cylinder Elimination Kit has been extensively torture tested on the street and the track, and is completely CAD/CAM engineered as a bolt on solution to common clutch concentric slave cylinder failures, with no permanent modification to the drivetrain.

Standard VQHR+ CSCEK features:

Howe Racing Pull-type Cylinder:
Constructed of lightweight CNC machined aluminum and hard anodized black, this pull-type slave cylinder uses two dynamic bore seals, a preloaded return spring, and features zinc coated hardware and rod ends for seamless function and maximized longevity.

Dust and Heat Shields:
Laser cut from stainless steel and precision CNC bended to specification, these auxiliary brackets are included for the peace of mind and reliability that comes from keeping dust and dirt out of the bellhousing and keeping road debris and exhaust heat away from the slave cylinder.

Mounting Solutions:
Laser cut and CNC formed and machined, the mounting bracket and fork clevis were designed with the explicit goal of function. Several iterations of optimizing for stiffness and fatigue life resulted in the final revision, that features Class 8.8 zinc plated fasteners and no unwanted deflection.

Clutch Ergonomics:
Paired with the late-model heavy duty cast fork and a braided stainless steel clutch line, a properly installed and adjusted VQHR+ CSCEK will feel natural, with virtually no slop even under the most rigorous situations.

Inspected, assembled, re-inspected and packaged in house by Z1 Motorsports’ trained staff, the VQHR+ CSCEK arrives ready to install on your Z or G out of the box. In the dropdowns below, indicate the clutch that will be used, as well as any clutch fluid options. Transmission fluid replacement is recommended but not mandatory for the installation of this kit.
To view a complete copy of the Installation Manual for the Z1 Motorsports Concentric Slave Cylinder Elimination Kit, please download the PDF document Here.

Please note: Product will ship in 1-2 weeks.

Click Here To Order. Pricing starts at $418!

Realale · 03-14-2014, 09:05 AM

JARblue · 03-14-2014, 09:07 AM

Bananaz · 03-14-2014, 09:17 AM

Pretty sick

Sent from my SCH-I545 using Tapatalk

wheee! · 03-14-2014, 09:35 AM

finally!!!

Redglare · 03-14-2014, 09:38 AM

how hard is this to install?

can this be a diy with a pair of jackstands?

Z1motorsports · 03-14-2014, 09:41 AM

Quote:

Originally Posted by Redglare

how hard is this to install?

can this be a diy with a pair of jackstands?

Comprehensive install information:
http://www.z1motorsports.com/upload/...ic%201.0.3.pdf

Mt Tam I am · 03-14-2014, 01:23 PM

I'm subscribed.

ZMan8 · 03-14-2014, 02:49 PM

Sub'd

Redsmoke89 · 03-14-2014, 06:29 PM

Ordered. Good thing i waited on pulling the trigger on the HD CSC.

xxAGAVExx · 03-14-2014, 09:30 PM

Subd

Sent from my iPhone using Tapatalk

Mike · 03-15-2014, 08:56 PM

I had this installed by Z1 a couple weeks ago, and I just did my first full track day with this setup (my car is a track only car) and it works great! Also, while I can't specifically quantify it, it seems to have a better feel than before with a more positive indication of the engagement point.

I am extremely happy with it and can highly recommend this product.

John@Z1 · 03-17-2014, 10:53 AM

Thanks Redsmoke89! Mike, it's always a pleasure!

LMBmikeZ · 03-19-2014, 01:48 PM

Sweet! Added to my list of "to buy"

John@Z1 · 03-20-2014, 09:09 AM

Quote:

Originally Posted by LMBmikeZ

Sweet! Added to my list of "to buy"

Very good to hear!

03-14-2014, 08:47 AM	#1 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 19	Z1 Motorsports: Clutch Concentric Slave Cylinder Elimination Kit Z1 Motorsports Clutch Concentric Slave Cylinder Elimination Kit With over a year in development and testing, Z1 Motorsports is now proud to offer a comprehensive, bolt on solution to the OEM clutch concentric slave cylinder for cars equipped with manual transmissions mated to VQ35HR and VQ37VHR engines. Thorough analysis and modeling of the factory clutch system's dynamics led to the development of an innovative kit that completely eliminates the failure-prone concentric unit, replacing it instead with a traditional release bearing mated to a Howe Racing pull-type slave cylinder. Due to the repeated exposure to high temperatures and the high operating pressure of the factory concentric system, it has been considered a weak point of the HR+ platform’s revised drivetrain. These failures are definite, and the symptoms obvious; whether it’s pushing the limits on the track, driving hard on backroads, or simply commuting – if the clutch pedal sinks to the floor during a shift and doesn’t return, the concentric slave cylinder is the likely culprit. Armed with an extensive list of design goals, product requirements, and functional benchmarks, the only solution was a no compromises approach. The Z1 Motorsports Concentric Slave Cylinder Elimination Kit has been extensively torture tested on the street and the track, and is completely CAD/CAM engineered as a bolt on solution to common clutch concentric slave cylinder failures, with no permanent modification to the drivetrain. Standard VQHR+ CSCEK features: Howe Racing Pull-type Cylinder: Constructed of lightweight CNC machined aluminum and hard anodized black, this pull-type slave cylinder uses two dynamic bore seals, a preloaded return spring, and features zinc coated hardware and rod ends for seamless function and maximized longevity. Dust and Heat Shields: Laser cut from stainless steel and precision CNC bended to specification, these auxiliary brackets are included for the peace of mind and reliability that comes from keeping dust and dirt out of the bellhousing and keeping road debris and exhaust heat away from the slave cylinder. Mounting Solutions: Laser cut and CNC formed and machined, the mounting bracket and fork clevis were designed with the explicit goal of function. Several iterations of optimizing for stiffness and fatigue life resulted in the final revision, that features Class 8.8 zinc plated fasteners and no unwanted deflection. Clutch Ergonomics: Paired with the late-model heavy duty cast fork and a braided stainless steel clutch line, a properly installed and adjusted VQHR+ CSCEK will feel natural, with virtually no slop even under the most rigorous situations. Inspected, assembled, re-inspected and packaged in house by Z1 Motorsports’ trained staff, the VQHR+ CSCEK arrives ready to install on your Z or G out of the box. In the dropdowns below, indicate the clutch that will be used, as well as any clutch fluid options. Transmission fluid replacement is recommended but not mandatory for the installation of this kit. To view a complete copy of the Installation Manual for the Z1 Motorsports Concentric Slave Cylinder Elimination Kit, please download the PDF document Here. Please note: Product will ship in 1-2 weeks. Click Here To Order. Pricing starts at $418! wheee!, Megan370z, Marti and 7 others like this. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com Last edited by John@Z1; 08-28-2015 at 10:16 AM. Reason: re up

03-14-2014, 09:05 AM	#2 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 14	John@Z1 likes this.

03-14-2014, 09:07 AM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	John@Z1 likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-14-2014, 09:17 AM	#4 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 13	Pretty sick Sent from my SCH-I545 using Tapatalk __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting

03-14-2014, 09:35 AM	#5 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40181	finally!!! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

03-14-2014, 09:38 AM	#6 (permalink)
Redglare Enthusiast Member Join Date: May 2012 Location: FL Posts: 387 Drives: C172 Skyhawk GIII Rep Power: 174	how hard is this to install? can this be a diy with a pair of jackstands?

03-14-2014, 01:23 PM	#8 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3842	I'm subscribed. __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

03-14-2014, 02:49 PM	#9 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 658	Sub'd __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

03-14-2014, 06:29 PM	#10 (permalink)
Redsmoke89 Base Member Join Date: Apr 2013 Location: GA Posts: 31 Drives: 09 370z Base Sport Rep Power: 12	Ordered. Good thing i waited on pulling the trigger on the HD CSC. John@Z1 and wheee! like this. __________________ Eibach Sway Bars / Swift Springs / Injen Intake / Berk HFC

03-14-2014, 09:30 PM	#11 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,014 Drives: 09 370Z BLK M6 Rep Power: 20368	Subd Sent from my iPhone using Tapatalk __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

03-15-2014, 08:56 PM	#12 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	I had this installed by Z1 a couple weeks ago, and I just did my first full track day with this setup (my car is a track only car) and it works great! Also, while I can't specifically quantify it, it seems to have a better feel than before with a more positive indication of the engagement point. I am extremely happy with it and can highly recommend this product. John@Z1, LMBmikeZ, GaleForce and 4 others like this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-17-2014, 10:53 AM	#13 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 19	Thanks Redsmoke89! Mike, it's always a pleasure! __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

03-19-2014, 01:48 PM	#14 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	Sweet! Added to my list of "to buy" __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch Slave cylinder broke @ 22K	chknhawk	Engine & Drivetrain	37	07-10-2018 10:46 AM
Clutch Slave Cylinder	Wiggins3377	Engine & Drivetrain	18	08-06-2015 09:26 AM
Clutch, Flywheel, and Slave Cylinder Combo Sale at R/T Tuning.	Erik@RTTuning	R/T Tuning	6	12-26-2012 12:10 PM
Clutch slave cylinder	NizzyBoy	Engine & Drivetrain	1	02-19-2011 02:24 PM