Research: Touring Aluminum Pedals onto Base

GonGo · 09-09-2009, 03:30 PM

Ive been checking out the parts at an online OEM parts store and would like to know if anyone has been going the same direction for this mod.

Brake and clutch pedals share the same pedal cover, the parts diagram shows the pedal pad as an individual part from the assembly for clutch and brake (Part# 46531) around 70 bucks each
Accelerator pedal only is available through the whole assembly (Part#18002)
about 130 bucks

I need to confirm if this parts numbers are indeed nissan's

Do any of the site sponsors carry this parts?

shabarivas · 09-09-2009, 03:35 PM

I am sure you will find them from vendors here

dcrew1x · 09-09-2009, 03:52 PM

I'll do some searching around. I'm very interested in this myself.

Geeve · 09-11-2009, 09:45 AM

This website seems to have some solid information on the pedals, including diagrams with part numbers for the entire assembly.

465 Brake & Clutch Pedal :: Brake :: Genuine Nissan Parts :: 370Z Parts (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

Geeve · 09-12-2009, 12:47 AM

Solution for aluminum touring pedals for base model 370z.

You can get the pedal pads for the clutch pedal and the brake pedal, in fact
they use the same pad. The footrest is the same on both models. However, the accelerator pedal has to be replaced as a whole.

-------Q157431-------
PAD PEDAL $77.60
PAD PEDAL $77.60
ACCEL-LEVER $130.17
---------------------
Ground shipping $9.85
Total $295.22

After replacing the accelerator pedal you must complete a "Accelerator Pedal
Released Position Learning" procedure.

----------------------------------------
Accelerator Pedal Released Position Learning is a function of ECM to learn the
fully released position of the accelerator pedal by monitoring the accelerator
pedal position sensor output signal. It must be performed each time the
harness connector of the accelerator pedal position sensor or ECM is
disconnected.

ACCELERATOR PEDAL RELEASED POSITION LEARNING :

1.START
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF and wait at least 10 seconds.
----------------------------------------

Jacob
Courtesy Nissan, Inc.
1777 N. Central Expressway
Richardson, Texas 75080
Phone 800-527-1909 or 972-644-3942
Fax 800-382-7891 or 972-234-4924
Email sales@courtesyparts.com
Internet Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

Modshack · 09-19-2009, 04:44 PM

I'll have a DIY up tomorrow on these custom pedals if you decide to go with some real aluminum. I've worked with the Manuf. to get these perfectly sized and contoured to the 370. Going on the car tomorrow.. $99-$150 (set) depending on finish.

SRP Racing - Custom Aluminum Racing Pedals

RCZ · 09-19-2009, 09:50 PM

I like them actually, not bad.

CBRich · 09-21-2009, 10:22 AM

So the manufacturer will have these for sale once we verify the fit and all is good?

Modshack · 09-21-2009, 12:22 PM

Quote:

Originally Posted by CBRich

So the manufacturer will have these for sale once we verify the fit and all is good?

Yup...Got an email this morning that they're going up on the site, In fact they're up now and even on an introductory sale!

Sullivan Racing Products. 370z 2009+

theDreamer · 09-21-2009, 12:24 PM

Quote:

Originally Posted by Modshack

Yup...Got an email this morning that they're going up on the site, In fact they're up now and even on an introductory sale!

Sullivan Racing Products. 370z 2009+

What option is yours that they sent you? Really like the look/finish of those.
~Grid
~With footrest?

Modshack · 09-21-2009, 12:30 PM

Quote:

Originally Posted by theDreamer

What option is yours that they sent you? Really like the look/finish of those.
~Grid
~With footrest?

Yup...Mine are Grid with the footrest.. DIY is now up also..

09-09-2009, 03:30 PM	#1 (permalink)
GonGo Base Member Join Date: Mar 2009 Location: Puerto Rico Posts: 80 Drives: 2009 370z PW M6 Rep Power: 16	Research: Touring Aluminum Pedals onto Base Ive been checking out the parts at an online OEM parts store and would like to know if anyone has been going the same direction for this mod. Brake and clutch pedals share the same pedal cover, the parts diagram shows the pedal pad as an individual part from the assembly for clutch and brake (Part# 46531) around 70 bucks each Accelerator pedal only is available through the whole assembly (Part#18002) about 130 bucks I need to confirm if this parts numbers are indeed nissan's Do any of the site sponsors carry this parts?

09-09-2009, 03:52 PM	#3 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 368	I'll do some searching around. I'm very interested in this myself. __________________ 2009 PG 6MT Sports Stillen Gen3 CAI \| Stillen CBE \| AMS Short Shifter \| Nismo Brace Kit

09-19-2009, 04:44 PM	#6 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 976	I'll have a DIY up tomorrow on these custom pedals if you decide to go with some real aluminum. I've worked with the Manuf. to get these perfectly sized and contoured to the 370. Going on the car tomorrow.. $99-$150 (set) depending on finish. SRP Racing - Custom Aluminum Racing Pedals __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z aluminum trimmed pedals	dcrew1x	Wanted	9	10-27-2009 10:06 PM
touring vs base with sport	eddieconfetti	Nissan 370Z General Discussions	19	07-22-2009 09:47 PM
Has anybody w/ Base interior swapped out their pedals for the touring set?	kevr6	Exterior & Interior	2	04-04-2009 01:58 PM
Touring worth the $4.5K premium over Base?	FairmanZ	Nissan 370Z Pricing / Ordering Discussions	33	02-14-2009 02:15 PM
Interior Door Panel on Base differs from Touring?	The Geek	Nissan 370Z General Discussions	21	01-13-2009 09:28 PM

09-09-2009, 03:35 PM	#2 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	I am sure you will find them from vendors here

09-11-2009, 09:45 AM	#4 (permalink)
Geeve Base Member Join Date: Apr 2009 Location: San Diego Posts: 7 Drives: Xterra & PG 370z MT Rep Power: 368	This website seems to have some solid information on the pedals, including diagrams with part numbers for the entire assembly. 465 Brake & Clutch Pedal :: Brake :: Genuine Nissan Parts :: 370Z Parts (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

09-12-2009, 12:47 AM	#5 (permalink)
Geeve Base Member Join Date: Apr 2009 Location: San Diego Posts: 7 Drives: Xterra & PG 370z MT Rep Power: 368	Solution for aluminum touring pedals for base model 370z. You can get the pedal pads for the clutch pedal and the brake pedal, in fact they use the same pad. The footrest is the same on both models. However, the accelerator pedal has to be replaced as a whole. -------Q157431------- PAD PEDAL $77.60 PAD PEDAL $77.60 ACCEL-LEVER $130.17 --------------------- Ground shipping $9.85 Total $295.22 After replacing the accelerator pedal you must complete a "Accelerator Pedal Released Position Learning" procedure. ---------------------------------------- Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time the harness connector of the accelerator pedal position sensor or ECM is disconnected. ACCELERATOR PEDAL RELEASED POSITION LEARNING : 1.START 1. Make sure that accelerator pedal is fully released. 2. Turn ignition switch ON and wait at least 2 seconds. 3. Turn ignition switch OFF and wait at least 10 seconds. 4. Turn ignition switch ON and wait at least 2 seconds. 5. Turn ignition switch OFF and wait at least 10 seconds. ---------------------------------------- Jacob Courtesy Nissan, Inc. 1777 N. Central Expressway Richardson, Texas 75080 Phone 800-527-1909 or 972-644-3942 Fax 800-382-7891 or 972-234-4924 Email sales@courtesyparts.com Internet Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

09-19-2009, 09:50 PM	#7 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	I like them actually, not bad.

09-21-2009, 10:22 AM	#8 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	So the manufacturer will have these for sale once we verify the fit and all is good?