07-25-2014, 01:31 PM
|
#25 (permalink)
|
|
Enthusiast Member
Join Date: Aug 2012
Location: Canada
Posts: 259
Drives: '12 M6 Panty Peeler
Rep Power: 13
|
Quote:
Originally Posted by aszyd
That sounds about right. I know with the oil filters, I tighten until it is almost too difficult to remove by hand. That way I know it's not going to rattle loose. I have been stuck with a torqued on filter and no wrench. It's not fun having to jam a screw driver through the filter to get it off.
Drain plugs are the same, but with tools. Just tight enough to need a little torque to take them off. It's not necessary to put them at 80 ft/lbs.
|
That sounds more like they mated it up to the surface without lubing the o-ring first. You can put a filter on tight with a 1/4 turn and have to plasma cut it off if someone didn't lube the mating surfaces first.
I am on my 10 billionth oil change (HD apprentice) and it is STILL something that drives me batshi+ crazy lol
|
|
|
Similar Threads
15Likes
Threaded Mode
