DIY : Radar display in mirror

Plasmite

So taking the stock mic out of the mount is really easy. There are two small phillips screws holding it in. You need a special screwdriver to take them out. They usually come in a set with three different phillips heads, plus some slotted heads. They are great for repairing glasses as well



Next, for my type of mic, the audio hole wasn't big enough, so I drilled it out using a 1/4 bit and rotating the bit around while I drilled. Ended up fitting like a glove



Finally some double sided tape to keep it in place and there you have it. The housing clips into the light assembly and your mic is nice and secure and functional. Will post reviews on how well it works

__________________
WISHLIST