03-28-2010, 09:46 PM
|
#11 (permalink)
|
|
Base Member
Join Date: Jul 2009
Location: Ottawa
Posts: 6
Drives: 09 Nissan 370Z RD M6
Rep Power: 17
|
Quote:
Originally Posted by bucketman
Here is the pics. Remove the plastic clip, then pullout the inner fender liner. Remove the 10mm bolt, then the squimish part, grab the bumper cover and give it a hard tug, the clips will pop right out. Of course this after you have removed all the other push pins and bolts.The other pics are of the cover over the strut bar, after removing the two push pins, just pry or yank up, there are a bunch of clips as you can see, just takes some muscle. Good luck.
|
Awesome... thanx so much... this looks OK to me... when you tug on the bumper to remove, where are the clips underneath? How many? Where should I be grabbing? Whole bumper in one tug or L-side then R-side?
I think I can figure it from here but any answers to the above might make it much less trial and error. 
|
|
|
Similar Threads
3Likes
Threaded Mode
