Anthracite on Black

http://i845.photobucket.com/albums/a...ps7e0fc5ff.jpg
http://i845.photobucket.com/albums/a...ps84ab9d12.jpg

^That looks really nice with the wheels :tup:

I actually couldn't tell the difference between anthracite vs. gunmetal. :ugh2:

Love the anthracite on black!

Sent from my Nexus 7

this weekend i paint my badges and handles.... and let me say something... those stupid change make the car looks a lot nice!!!

http://farm3.staticflickr.com/2875/9...0fecfe89_c.jpg
20130901_130412 by carlitos_sti, on Flickr

http://farm4.staticflickr.com/3704/9...84caf15f_c.jpg
20130901_130351 by carlitos_sti, on Flickr

http://farm4.staticflickr.com/3679/9...31ef0bc8_c.jpg
20130901_130428 by carlitos_sti, on Flickr

Nice work.

Keep it goin' carlitos!

It's a little addicting isn't it?

I think the front fang area is next haha!

Thanks!!!:tup:

hahaha!!! yeah my friend... but i think the next part to be plasti diped are going to be the rear bumper, the part that seat the fog light ;) lets see

Yes! That dipped area part will protect your bumper from exhaust fumes and grime that shoots out. I have some photos in my album on how i did mine:tup:

thanks bro im going to check btw... How i can remove the tape and paper with out damage the plasti diped area??

Buy the "straight edge" painters tape from Hardware Store. Try and tape off the best you can in a straight line. Its best to use the crease that the car has as your line.

Spray a few coats and on the last coat make sure you spray the edges well and get them wet again. Then pull off the tape and paper as fast as you can so it doesn't dry. Do it in the garage or in the shade so you get a few more seconds to peel without it drying..

Theres a couple vids on youtube if you don't understand completely. Trial and error sometimes

thanks bro!!! im going to try it as soon i install the front lip ;) thanks!!

http://i19.photobucket.com/albums/b1...psb7da4493.jpg
http://i19.photobucket.com/albums/b1...ps3cc283ec.jpg
http://i19.photobucket.com/albums/b1...ps49410416.jpg

Dozier - If i could make a couple of recommendations, I would remove the plastidip on the side markers, but only the Z part. Not the ring around the emblem. Itll make it stand out much more, I promise. Especially with your wheels.

Also, check out my build thread on my headlights. They would look really good with the rest of your blacking out.

Consider using "Glossifier" for a glossy finish like your roof rather then the matte.

Roof is vinyl wrap. I plan on smoking the tail lights and the inside of the headlights. I will paint the projector ring red to match the car also.