DIY: of complete FOG LAMP install

CBRich · 03-21-2010, 05:26 PM

Skip the dummy box. Run both wires into the trunk through the plug on the driver's side. It pops right out. From there you are right at the grounding point and the green brake wire is in the loom.

Minicobra1 · 03-21-2010, 06:06 PM

Quote:

Originally Posted by CBRich

Skip the dummy box. Run both wires into the trunk through the plug on the driver's side. It pops right out. From there you are right at the grounding point and the green brake wire is in the loom.

Ok, thanks

I'll give it a shot, I got most stuff out of the trunk, but I'm not seeing the plug on the drivers side yet, I guess I need to remove the jack tray, etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM

03-21-2010, 05:26 PM	#1 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 546	Skip the dummy box. Run both wires into the trunk through the plug on the driver's side. It pops right out. From there you are right at the grounding point and the green brake wire is in the loom.