DIY: of complete FOG LAMP install

theDreamer · 10-26-2009, 03:29 PM

It is on the steering column where the light switch is I believe, there is an extra flip to turn on the fog light.

Pointman · 10-26-2009, 03:35 PM

Uggggg that could be a problem. I was hoping it was the dead switch between the seat warmer switches.

SVTRacer · 10-29-2009, 11:24 AM

Quote:

Originally Posted by Cjanik

My car came with the stock wiring harness for the foglight. I have a sports touring model in case it matters.

However, the other end of the wires from the plug I found, is connected to nothing since My car didnt come with the "Fog light switch".

What I did was: plugged in the harness into the fog light. Then took the trunk panels (inside) off so that I could see the frame, which exposed a couple wiring harnesses. The light orange wire is the one that went to the fog light plug, and the green wire (i think, im not remembering very well) went to turn on the taillights when the brake is presssed. So I spliced those wires together, and that was it.

Now my fog light turns on everytime i hit the brakes.

Thanks for the tip. I did this as well. Nice and easy, and you only have to remove the rear trunk panel.

Quote:

Originally Posted by Pointman

Uggggg that could be a problem. I was hoping it was the dead switch between the seat warmer switches.

I was thinking about using this spot for a switch, too. Was this used for another switch included with some other options? Why is it there?

10-26-2009, 03:29 PM	#1 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4212	It is on the steering column where the light switch is I believe, there is an extra flip to turn on the fog light. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

10-26-2009, 03:35 PM	#2 (permalink)
Pointman Base Member Join Date: Aug 2009 Location: Pensacola, FL Posts: 128 Drives: 370Z Sport/Tour Nav Rep Power: 277	Uggggg that could be a problem. I was hoping it was the dead switch between the seat warmer switches. __________________ JTTF SQ8

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM