DIY: LED Halo w/Video's

Nut_N_Much

This morning started good, I wrapped the reflector and mounted the large halo with 2 part epoxy. Later in this thread I will recommend not using epoxy, just use Auto Goop for Everything. It works great.. The large halo wont recede so its generously glued to the outside of the shroud.



Sanded the filler from last night and finished taping off the light shroud and painted..



Waiting for the paint to dry I cut the strip for the light shroud..



I would like to say PAINTERS TAPE SUCKS.. It was probably my fault i should have gotten some better tape. I used what I had laying around. Man it would have had the perfect balance of chrome trim and carbon.



So I picked up the hammer and .... Just kidding, shifted gears and re-taped the Carbon strip. Going all black.. I will say I did NOT sand these to ruff them up before painting. ***Make sure you do rough them up before painting*** I was amazed how easy it flaked off when I removed the tape.. Lesson Learned.



Starting the second Light wile this one dries. Now I have to repeat everything I did on the first light.

__________________

Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html
http://www.the370z.com/diy-section-d...-w-videos.html