Steering Lock: cut one wire. /switch optional

Mike

like what?

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

GaleForce

Determining the possibility of removing the S/L completely.

__________________

Dwight Frye

From my admittedly limited knowledge of the circuits involved with the lock, I think all of the other wires except the brown one have to still be connected to the lock mechanism as there is some kind of loop through or feedback from the lock module to the BCM. So you could probably completely remove the lock assembly but you would still have a bunch of wires that need to be connected.
I'll just leave the lock assembly in place and not worry about it if disabled.

ChrisSlicks

That is my believe as well, although it isn't documented very thoroughly (intentionally). I'll do the brown wire cut first with the harness first and then do some probing with a scope to see what is what. I was going to cut the wire in the stock harness but once I got under there and saw how tight and filddley it was I chickened out as I had a track day that weekend.

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms