![]() |
When you guys work on the harness from the back of the headlights, do you pop off all 3 rivets attached to the fender well in order to access to
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#28 (permalink) |
A True Z Fanatic
Join Date: Oct 2011
Location: 403 Forbidden
Posts: 2,512
Drives: 2009 NISMO 370Z
Rep Power: 19 ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
When you guys work on the harness from the back of the headlights, do you pop off all 3 rivets attached to the fender well in order to access to the harness or just pop off the most outer rivet and pry the fender well to get the access?
__________________
09 PW 370z Nismo | K&N Drop Ins | HKS Hi Power | Berk HFCs | Work Meister S1 3P | Project Kics R40 Neo Chrome Lug Nuts | KW V1 | SPC rear camber arms/toe bolts | Southbend Stage 3 daily clutch | Southband 19Ib Steel Flywheel | ZSpeed CSC |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bumper/headlight removal questions | Slowfashow | Exterior & Interior | 4 | 01-05-2013 03:52 AM |
DIY Headlight Moisture Removal | Nut_N_Much | DIY Section (Do-It-Yourself) | 3 | 12-02-2012 09:46 PM |
Headlight removal | hyunsoo1803 | Exterior & Interior | 3 | 06-21-2012 10:53 PM |
help with gum removal | thispecialk | Nissan 370Z General Discussions | 7 | 08-05-2009 10:41 AM |