DIY: Front Bumper Removal

Leuz

Old thread resurrection. Has anyone taken off the bumper of a 2013?
I was reading DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)
and there are some pictures of a 2013 but it doesn't say if you have to unplug the DRL cables or unbolt the leds all together or just tear everything apart and have no leds anymore..

Update: I did it. The easiest way is to remove the front wheels and fenders. I did the job with a buddy of mine. Here are the steps:

1. Remove the wheels, remove the fenders; you need only the front half of the fenders really
2. Remove driver's side DRL, three bolts and a plastic rivet
3. Unplug the bumper clips, do not remove it as the passenger's DRL are still on. Here I used my buddy's help to hold the bumper, while I was accessing the RH DRLs, as the washer fluid tank is in your way otherwise
4. Bumper is off. I wrapped the DRLs in bubbly plastic, and taped it to the brake pads with blue tape. I also taped the bolts and rivet there to it lose them

__________________
2013 PW 370Z Touring+Sport, NAV
Tint 35% side, 18% back | RJM clutch pedal | ZSpeed SS lines | Stillen Gen3 CAI | Fast Intentions HFC and TDX 12'' CF CBE | UpRev