Is the same steps for front bumper removal for the NISMO 2016?
|
|
LinkBack | Thread Tools | Display Modes |
09-18-2020, 04:12 PM | #93 (permalink) |
Base Member
Join Date: Jul 2020
Location: Slidell, LA
Posts: 34
Drives: '19 370Z NISMO, auto
Rep Power: 8261 |
I note that this was originally posted way back in 2009. Is this still current? And does it equally apply to a late model NISMO bumper?
Thanks.
__________________
Shoot high, go fast! |
09-18-2020, 04:50 PM | #94 (permalink) | |
Base Member
Join Date: Jul 2020
Location: Michigan
Posts: 1
Drives: 10 Nissan 370z k51 M
Rep Power: 5 |
Quote:
I believe the general way to remove it is still the exact same. There might be 1 or 2 more bolts to remove from under the car if you have a nismo but its all the same. A couple clips on the top. 1 bolt on each side. And the 8 ish bolts under it. If you have the nismo bumper make sure to disconnect the fog lights before completely removing the bumper. |
|
09-18-2020, 08:12 PM | #95 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
Yup pretty much the same. Clips on top. Screws underneath. You may have DRLs to disconnect. The screw under the front fender lining and the clips under the headlight are still the same.
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
09-18-2020, 08:13 PM | #96 (permalink) |
A True Z Fanatic
Join Date: May 2015
Location: Atlanta, GA
Age: 52
Posts: 9,299
Drives: 2012 Blue BallZ
Rep Power: 2684382 |
I'll be popping this off soon when I paint.
__________________
“Happiness is having a large, loving, caring, close-knit family in another city.”-George Burns
|
10-19-2022, 09:48 AM | #99 (permalink) |
Base Member
Join Date: Jul 2020
Location: Slidell, LA
Posts: 34
Drives: '19 370Z NISMO, auto
Rep Power: 8261 |
I think the answer is no, due to the screws that secure the top center portion that reside under the front edge of the hood. But, if you release the entire bottom and sides and bend the bumper up, that may give you enough clearance to get to the hood release. Let us know how you solve this please!
__________________
Shoot high, go fast! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bumper/headlight removal questions | Slowfashow | Exterior & Interior | 4 | 01-05-2013 04:52 AM |
Removal of Tailights!!! Front bumper off?? | jlbrenne | Nissan 370Z General Discussions | 5 | 08-17-2012 12:28 PM |
Rear bumper removal? | Reaper42 | Exterior & Interior | 16 | 05-17-2012 10:47 PM |
Pop up Engine Hood indicator - After bumper removal | AH370Z | Nissan 370Z General Discussions | 15 | 06-13-2011 12:01 PM |
REQUEST: Front Bumper Removal | Cyberium | DIY Section (Do-It-Yourself) | 15 | 07-18-2010 02:43 PM |