04-09-2012, 05:27 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Dec 2008
Location: Southern California
Posts: 1,259
Drives: MK 7.5 Golf R
Rep Power: 23
|
Quote:
Originally Posted by fritz
Zero wrote:
Do you know the Panasonic micro switch part number used on this lock mechanism?
Yes: "ASQ11510" on the lock. "ASQ11510J" on the plastic baggy with a new
one inside.....Maybe the "J" is an update ???.
Also on the bag was "699-0160". They turned out to be unexpectedly cheap at 3 or 4 Euros max each.
Yagoogle ASQ11510 for the Panasonic data sheets the last one of which states the suggested uses and that grease/oil are to be avoided.
There's two microswitches either one of which can leave you immobilised.
Let's know how you go!
Fritz
|
Thanks, Fritz. The switches are normally close. If you removed the switches off the circuit board, they would be normally open. this would pass-by the switches as if the switches were pressed all the time. I saw one guy was doing it and the car started without any problem.
__________________
|
|
|
Similar Threads
1Likes
Threaded Mode
