DIY: Triple Gauge Cluster

jmroy6 · 10-02-2018, 11:16 AM

Quote:

Originally Posted by scope22

for me at least, you dont have to remove the dash to install

I didn't have to either, but it will most likely be more difficult to install. it was a bitch!

Falconquey · 11-24-2018, 10:25 PM

Quote:

Originally Posted by jmroy6

I didn't have to either, but it will most likely be more difficult to install. it was a bitch!

These are awesome.

cgr406 · 11-27-2018, 08:44 PM

Test fitting my VEI gauges. No sensors connected yet. Does anyone know if the OEM wiring harness for the stock triple gauges contains a wire from the headlight switch / circuit? If not, what did you connect to for the gauge dimming feature (gauges dim when headlights are on)?

Gauges-Small.jpg

dts3 · 11-28-2018, 02:11 AM

Quote:

Originally Posted by cgr406

Test fitting my VEI gauges. No sensors connected yet. Does anyone know if the OEM wiring harness for the stock triple gauges contains a wire from the headlight switch / circuit? If not, what did you connect to for the gauge dimming feature (gauges dim when headlights are on)?

Attachment 133095

I bought a spare triple meter on eBay to play with, but I don't have the harness yet. I remember someone in a different thread saying that they could not get dimming working from any of the hard lines into the harness, implying that it's dimmed from a CAN message (probably related to the headlight status)

cgr406 · 11-30-2018, 09:19 PM

So i found a wire in the largest of the four connectors that go into the audio head unit that controls dimming. This wire carries 0v if the headlights are off & 12v if they are on. It's the one circled in the attached picture. It's a red wire. This is for a 2014 w/ Bose but w/out nav. I test connected this to the dimming wire on my VEI gauges & it works perfectly.

dts3 · 03-16-2019, 10:06 PM

Quote:

Originally Posted by cgr406

So i found a wire in the largest of the four connectors that go into the audio head unit that controls dimming. This wire carries 0v if the headlights are off & 12v if they are on. It's the one circled in the attached picture. It's a red wire. This is for a 2014 w/ Bose but w/out nav. I test connected this to the dimming wire on my VEI gauges & it works perfectly.

This is what I used for my gauges as well

Girald · 04-02-2020, 03:30 AM

Quote:

Originally Posted by dts3

This is what I used for my gauges as well

Welcome to the club

11-27-2018, 08:44 PM	#3 (permalink)
cgr406 Base Member Join Date: Sep 2013 Location: pittsburgh Posts: 106 Drives: '14 Z Sport Tour 6M Rep Power: 3368	Test fitting my VEI gauges. No sensors connected yet. Does anyone know if the OEM wiring harness for the stock triple gauges contains a wire from the headlight switch / circuit? If not, what did you connect to for the gauge dimming feature (gauges dim when headlights are on)? Gauges-Small.jpg __________________ TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just swapped the triple meter OEM gauge	JP-370Z	Exterior & Interior	59	02-13-2021 01:44 PM
triple gauge covers	soldknow	Exterior & Interior	5	01-30-2011 12:03 PM
WTB: Gauge Cluster	Push370zzz	Parts for sale (Private Classifieds)	4	10-14-2010 04:44 PM
WTB: Gauge Cluster	Push370zzz	Wanted	0	10-14-2010 03:28 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 10:28 PM