DIY: Replace dreaded steering-lock on 2009s and early 2010s.

ChrisSlicks

My guess is that the remote starter in his case is wired in post BCM and IPDM (as I described in a previous post about a racing style setup), and they are instead sending signals directly to the ignition and starter relays. The remote starter is also wired into the brake switch on auto's and clutch switch on manuals as an anti-theft mechanism to prevent the car from being driven while on remote start mode. You could remove these wires if you didn't care about that aspect. So there is no BCM or IPDM trickery, just a complete bypass. When the BCM is back in control of the starting operation it says no go as the steering lock is stuck.

Given the frequency that these lock issues are starting to occur it might be time to start putting pressure on Nissan for a recall. Obviously they aren't going to do it voluntarily given that it is an expensive part. We could set up a petition and send it to Nissan or everyone that has had a failure can submit a complaint to NHTSA. If successful they are usually back dated so anyone that has paid for a replacement outside of warranty has an opportunity to get reimbursed.

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms