DIY OEM Shift Boot Install on Automatic

Originally Posted by somatic

Part #969351EA1A uve got to order this one, because if you order the sport one it costs more because of that damn s button
Tired of that boring looking transmission, but you don't want the hassle of a manual? Look no further! Rep please lol


So what I ordered was the OEM boot and bezel from my dealerships parts department.

First thing you do is pull down the base of the shift knob.

Then you pull that spring clip off, which will allow you to take the knob itself off.


Then you pull the bezel up. You don't have to yank it, it comes up pretty easily.

Now let's take a look at the OEM boot assembly.

If you turn it upside down, you'll see that the bezel is actually two pieces screwed together. Unscrew all the screws.

Now you can pull the boot out.

Next, lay the boot over the gearbox. Try to tuck it in as deep as possible. No matter what you'll have enough slack to freely shift.

The best way to put the bezel on is to hold the boot in place with one hand and lay it down. Try to make sure the stitching on the boot matches the positioning of the stitching on he bezel.

Now put the shift knob back on.

Voila! Enjoy your sportier looking car