Nissan 370Z Forum

DIY: Stillen header installation

Thanks for the DIY! I got some long tubes in the other day. A ratcheting 14mm wrench is a god send. The Kobalt that I bought from Lowes was able

370Z Forums HOME

My Picture Album

Nissan 370Z Pictures

Premium Membership

Become a Forum Sponsor

		Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)
DIY: Stillen header installation

Like Tree

9Likes

Prev

Previous Post

Next Post

Next

07-01-2014, 11:36 AM	#34 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 22	Thanks for the DIY! I got some long tubes in the other day. A ratcheting 14mm wrench is a god send. The Kobalt that I bought from Lowes was able to withstand the abuse. I was surprised when it was able to stand up to some of these bolts. I thought for sure it would break once I put some torque into it. Also, I had no issues removing the front o2 sensors. A little twist from a 22mm wrench is all it took to break them loose. After that, they just spun right off. I'd say it was about the same as the rear o2s. Those heat shields though... The front bolt on those was a PITA. I swear, whomever put those on did it wrong. The drivers side snapped off and I had to cut the passenger off once I stripped the bolt. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM Last edited by aszyd; 07-01-2014 at 11:39 AM.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
STILLEN Sweepstakes - Free Trip To See The STILLEN GT-R Rally!	Josh@STILLEN	Nissan 370Z General Discussions	36	06-30-2009 12:44 PM
Muffler shop ? and header questions..	AceSpade77	Intake/Exhaust	3	05-06-2009 11:35 AM
Installation of Bluetooth. . .	keke	Nissan 370Z General Discussions	10	05-05-2009 08:38 PM
Header-Downpipe gasket & Stillen CBE Allignment	DannyGT	Intake/Exhaust	21	04-24-2009 11:35 AM

All times are GMT -5. The time now is 04:05 AM.