How to rice out your Z to the max vol.1 <Carbon Fiber film your B-pillars>

m4a1mustang · 07-01-2010, 11:43 AM

Has anyone tried spraying the film with a clear coat?

Nismo_370z · 07-01-2010, 03:03 PM

This may be a dumb question, but is there any possible way to remove the b-pilars to have a more precise wraping?

m4a1mustang · 07-01-2010, 03:08 PM

Quote:

Originally Posted by Nismo_370z

This may be a dumb question, but is there any possible way to remove the b-pilars to have a more precise wraping?

Yes... they pop off.

TongMan · 07-01-2010, 05:41 PM

Its here...wow that was quick shipping.

kenchan · 07-01-2010, 05:52 PM

Nice! I should be getting my small roll real soon too. Can't wait to start my project.

Be careful removing the B-Pillar covers as I've read some folks breaking the tabs. Not that you can't fix it with some double stick tape.

I don't plan on removing mine to do the B-Pillars.

wishihadnav · 07-01-2010, 06:32 PM

cant wait for Max Rice vol.2!!

NewYorkJon34 · 07-01-2010, 07:51 PM

Quote:

Originally Posted by jetguy

cool! now it looks like Audi r8 !!!!!

I wish it did, lol

TongMan · 07-01-2010, 11:07 PM

For the fangs, I had to do it in three pieces - the two fangs and the middle portion. I was in a rush to get to the movies, so I applied the right side incorrectly. I may have to redo that side if I get too many negative feedback. The b-pillars was cake to do. I haven't done the rear valence yet, but I imagine that it would take some patience to get it done correctly.

kenchan · 07-02-2010, 07:52 AM

Not bad! Especially for first trial I think it looks pretty damn good!

Man, my CF roll tracking# shows still no movement.

NewYorkJon34 · 07-02-2010, 03:04 PM

I'd be too worried of this stuff fading in the sun to put it on my car's exterior, looks good tho

fullmonty · 07-02-2010, 05:08 PM

Quote:

Originally Posted by NewYorkJon34

I'd be too worried of this stuff fading in the sun to put it on my car's exterior, looks good tho

I don't think it would be that big of a deal to pull it off and reapply fresh.

kenchan · 07-02-2010, 07:05 PM

my 3M sheet came in as well so made below...

didn't have to remove and wrapped around the sides.

door jam side:

window side:

ofcourse we need CF door trims as well...

i have real CF overlays coming to me
next week but oh well..

took me some time to get it just right...

TongMan · 07-02-2010, 07:11 PM

Nice^^

Finished my rear valence, plus took some new daytime pics.

m4a1mustang · 07-02-2010, 07:12 PM

That came out really nice.

TongMan · 07-02-2010, 07:14 PM

Thanks. The fangs were the most difficult to do. All the other pieces were cake. I got plenty of di noc left to do the interior. Should I attempt to cover my Nissan and 370z emblems or the mustache above the fangs?

07-01-2010, 11:43 AM	#31 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Has anyone tried spraying the film with a clear coat? __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-01-2010, 11:07 PM	#38 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	For the fangs, I had to do it in three pieces - the two fangs and the middle portion. I was in a rush to get to the movies, so I applied the right side incorrectly. I may have to redo that side if I get too many negative feedback. The b-pillars was cake to do. I haven't done the rear valence yet, but I imagine that it would take some patience to get it done correctly. Last edited by TongMan; 07-02-2010 at 03:31 AM.

07-02-2010, 07:12 PM	#44 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	That came out really nice. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-02-2010, 07:14 PM	#45 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	Thanks. The fangs were the most difficult to do. All the other pieces were cake. I got plenty of di noc left to do the interior. Should I attempt to cover my Nissan and 370z emblems or the mustache above the fangs? Last edited by TongMan; 07-02-2010 at 07:19 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO-R 370Z carbon fiber B Pillars	EVOR	Exterior & Interior	20	10-12-2011 10:51 PM
Carbon Fiber B pillars. Which are best?	NXTAZEE	Exterior & Interior	11	05-14-2010 10:51 PM
Carbon fiber B pillars anyone??	g35300mm	Exterior & Interior	10	04-28-2010 02:35 PM
For trade: Carbon Fiber A Pillars	phelan	Parts for sale (Private Classifieds)	12	04-23-2010 08:45 AM
Carbon Fiber B pillars	SpawnAeroJohn	Nissan 370Z General Discussions	26	07-17-2009 08:25 AM

07-01-2010, 03:03 PM	#32 (permalink)
Nismo_370z Base Member Join Date: May 2010 Location: Oklahoma Posts: 32 Drives: 09 Nismo 370Z BS M6 Rep Power: 14	This may be a dumb question, but is there any possible way to remove the b-pilars to have a more precise wraping?

07-01-2010, 05:41 PM	#34 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	Its here...wow that was quick shipping.

07-01-2010, 05:52 PM	#35 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Nice! I should be getting my small roll real soon too. Can't wait to start my project. Be careful removing the B-Pillar covers as I've read some folks breaking the tabs. Not that you can't fix it with some double stick tape. I don't plan on removing mine to do the B-Pillars.

07-01-2010, 06:32 PM	#36 (permalink)
wishihadnav A True Z Fanatic Join Date: Nov 2009 Location: 90090 Posts: 1,851 Drives: Force Fed Nismo Rep Power: 183	cant wait for Max Rice vol.2!!

07-02-2010, 07:52 AM	#39 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Not bad! Especially for first trial I think it looks pretty damn good! Man, my CF roll tracking# shows still no movement.

07-02-2010, 03:04 PM	#40 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	I'd be too worried of this stuff fading in the sun to put it on my car's exterior, looks good tho

07-02-2010, 07:05 PM	#42 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	my 3M sheet came in as well so made below... didn't have to remove and wrapped around the sides. door jam side: window side: ofcourse we need CF door trims as well... i have real CF overlays coming to me next week but oh well.. took me some time to get it just right...

07-02-2010, 07:11 PM	#43 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 715	Nice^^ Finished my rear valence, plus took some new daytime pics.