DIY: Blinder installation and radar detector hardwire

semtex

Yeah, I thought about it, and same thing -- I couldn't figure out where to put them. I used to use the K40, and you could mount it right onto the license plate with the license screws, but you can't really do that with the Blinder. I mean, even if you went with just 1 transceiver, the thing is a lot deeper than the K40, so it'd jut out like 4 inches and look silly. I did discover something interesting though -- the width of the transceiver is the same width as the rear fog lamp area! It would fit perfectly in there! Thing is, we'd need to figure out a way to nicely cut off about 2 inches off of top of the cover. Plus, I'm sure the wiring harness and plug that sits behind the cover would be an issue as well. But it's a thought. Anyway, cops around here never hit cars with laser from behind (knock on wood), so I figured I don't really need coverage back there.

__________________
"There are no small accidents on this circuit." -- Ayrton Senna
316.8whp & 248 ft/lbs (Dyno Dynamics) | 319whp & 256 ft/lbs (DynoJet) (04/23/10)
Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.