Differential Bush removal options

ZPWR

Thanks man. Appreciate your helpful advice and tips.

Rusty

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Tractionless

Where did you source the flapper wheel? The link is to a Canadian company that doesn't have online store nor have they answered my email for 2 weeks. I haven't been able to locate one through online search.

__________________
Toys Not Tots

Rusty

Home Depot.

https://www.homedepot.com/p/WALTER-S...F306/305936869

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Tractionless

Nice thanks!! Been searching flapper wheel all this time and dang HD etc. didn't make the relation.

__________________
Toys Not Tots

Rusty

You have watch your search on Home Depot. You put in flapper wheel, and you get toilet flappers.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Tractionless

Pretty much. I noticed the same with ebay, amazon and lowes as well with Amazon ALYAWS being a fail! So much for AWS.

__________________
Toys Not Tots

ZoomZ

Hi ya Rusty,

Wouldn't the Anti-seize be detrimental to even polyurethane? I'm assuming Whiteline and SPL are both poly.

Are you worried about corrosion in the subframe or for eas of install as a lubricant?

Either way, I think White Lithium grease would be safer on the poly and still provide anti-rust properties.

zz

Rusty

The SPL bushing is solid aluminum. The Whiteline is poly. I haven't seen any reports of anti-seize being bad on poly. I use the anti-seize for installation of the bushings. I know you won't get far trying to install a bushing dry.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

ZoomZ

Right. Forgot SPL is solid Al. I would definitely use anti-seize.

I agree, you have to use something. Even Butter, if that's all you got.

Rusty

After having done a few bushings. I would rather do solid bushings then poly bushings. The poly bushings like to squeeze out in the middle when pressing them in.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

ZoomZ

Are you talking just the diff or all around on suspension where rubber exists?

So my understanding with solid bushings, you will feel and hear the vibrations more pronounced? What's you experience?

zz