|
I just had all my clutch parts redone (including clutch plate, pressure plate, and flywheel) and installed the RJM Pedal myself. It was a pretty tight fit, a little frustrating
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-15-2016, 10:59 PM
|
#6 (permalink) |
|
Base Member
Join Date: Oct 2013
Location: California
Age: 34
Posts: 66
Drives: 2011 Gun Metallic Z
Rep Power: 13  |
I just had all my clutch parts redone (including clutch plate, pressure plate, and flywheel) and installed the RJM Pedal myself. It was a pretty tight fit, a little frustrating sometimes, but just holding and playing with the RJM vs the oem unit the RJM is a much better piece. It is a little relieving to hear that youve been driving it for a week and are still adjusting, Ive been having a little trouble getting it just right.
__________________
Mods: Z1 CAI, Fast Intentions HFC + Cat Back, 4.08 Gears + VLSD Swap, Southbend DxD Clutch+lightweight flywheel = 310 HP 285 ft/lbs |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Possible solutions to aftermarket clutch master cylinder | Alstann | Engine & Drivetrain | 32 | 03-26-2015 08:59 PM |
| [WTB] Need a Clutch Master Cylinder | guzmanb66 | Parts for sale (Private Classifieds) | 11 | 03-13-2015 12:42 PM |
| Clutch master cylinder | Jimbo370 | Engine & Drivetrain | 14 | 11-19-2014 10:38 AM |
| Replacing the clutch line and clutch master cylinder | djrelic | DIY Section (Do-It-Yourself) | 1 | 05-12-2014 01:46 PM |
| Clutch master cylinder went out again | Zenmaster | Engine & Drivetrain | 4 | 03-26-2013 12:54 AM |
1Likes
Threaded Mode
