DIY: [How-To:] Racing Seat airbag light fix

gomer_110

The plan would be to remove the white and black fabric off both sides of the pad to be able to follow the circuit traces. Would also need to scrub off the plastic covering off the traces at various spots to be able to take readings.

Assuming I'm right about the way the sensor is designed I would envision a small box containing the original control module, additional wiring, and a switch to enable/disable the airbag.

As far as getting it back: if it works then absolutely, if I can't figure it out then I'd still get it back to you the only thing would be that the fabric on both sides would be removed and the mat would have some exposed circuit traces on it.

Let me know if you're still interested.

Also just came across this: BMW & MB SRS Emulator. Obviously it's not spec'ed for our cars but for $20 it might be interesting to give it a shot and see what happens.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock