11-24-2010, 07:03 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 654
|
Quote:
Originally Posted by flashburn
So I didn't fill in between each brakeline swap, but I did bleed each brake several times, and didn't have any bubbles. I took it out for a test drive and the new lines feel great, much more precise and not really spongy at all any more... so I'm guessing I'm fine? I did only use one bottle (1.05liter) of RBF600 though.
|
Yeah, you should be fine. Just to make sure jump on the brakes as hard as possible to engage ABS.
Quote:
Originally Posted by flashburn
Also this took me way longer than an hour...  , more like 8 hours! I even had to go to the store to buy some PB Blaster to loosen one of the bolts, thing just wouldn't budge! |
Which bolt? There shouldn't have been anything on the brake line on there that tight. The tightest one I encountered was the flare fitting to the hard-line, but as long as you cracked that before removing the clip it was fine.
|
|
|
Similar Threads
10Likes
Threaded Mode
