2014 GTA Meets

LMBmikeZ · 02-12-2014, 09:03 AM

Quote:

Originally Posted by Amuse370z

Whats reasonable for installing Amuse prep and paint, coilovers, camber arms, exhaust, replace rear foglight with EVO-R, install custom LEDs in front bumper?

EDIT: Might possibly replace a dent on the HKS muffler, what should I expect to pay?

I'm going to ask Velocity and Alphawerx, whoever gives me the better deal gets the business come summer time.

wow! that's a big list!

also alphawerx is actually - Elite concepts now just FYI

Welcome

merkil · 02-12-2014, 09:08 AM

Quote:

Originally Posted by LMBmikeZ

exhaust and sways EASY! I would help you out I am in woodstock do you have a garage? mine is kinda full and Z is up on jack stands currently

You are very close to me...and yes I do have a garage with the z currently sleeping in it

maybe we can work something out?

Not sure if I'll have all the proper tools though. Should be fine as I have ratchet sets and what not.

Only concern is jacking the car and jack stands. I have 2 but haven't jacked up this car before and from reading not 100% on the placement along the rails with the standard U shape jack head.

Sent from my iPhone using Tapatalk

Amuse370z · 02-12-2014, 10:26 AM

Oh I never posted this pic, I saw Melloyello back when the weather was nice. Makes my car look like a 4x4 lol

LMBmikeZ · 02-12-2014, 12:00 PM

Quote:

Originally Posted by merkil

You are very close to me...and yes I do have a garage with the z currently sleeping in it

maybe we can work something out?

Not sure if I'll have all the proper tools though. Should be fine as I have ratchet sets and what not.

Only concern is jacking the car and jack stands. I have 2 but haven't jacked up this car before and from reading not 100% on the placement along the rails with the standard U shape jack head.

Sent from my iPhone using Tapatalk

I probably have everything you do not currently have and can bring what ever is needed. I am a licensed electrician/handy man so I have more then enough tools and willing to help. If you have a jack and some stands we are good to go. I can bring my jack but currently my 4 car jack stands are under my Z

I have two other jack stands but they are larger for trucks/suvs. Plus I worry about twisting frame or warping sh!t I wouldn't need to get your car that high I always over worry about bending or warping even the the littlest things I am super anal about it and always lift the car slow! Now that I think of it, it would be better if I had two jacks then I could do both front sides at the same time! I also use and will bring thick industrial grade rubber almost like hockey pucks to act as a cover for the jack stands helps keep the babies pretty.

merkil · 02-12-2014, 04:31 PM

Quote:

Originally Posted by LMBmikeZ

I probably have everything you do not currently have and can bring what ever is needed. I am a licensed electrician/handy man so I have more then enough tools and willing to help. If you have a jack and some stands we are good to go. I can bring my jack but currently my 4 car jack stands are under my Z

I have two other jack stands but they are larger for trucks/suvs. Plus I worry about twisting frame or warping sh!t I wouldn't need to get your car that high I always over worry about bending or warping even the the littlest things I am super anal about it and always lift the car slow! Now that I think of it, it would be better if I had two jacks then I could do both front sides at the same time! I also use and will bring thick industrial grade rubber almost like hockey pucks to act as a cover for the jack stands helps keep the babies pretty.

This is rubber that fits over the U shaped head? Very interested and seeing and learning.

Sent from my iPhone using Tapatalk

LMBmikeZ · 02-12-2014, 10:10 PM

Quote:

Originally Posted by merkil

This is rubber that fits over the U shaped head? Very interested and seeing and learning.

Sent from my iPhone using Tapatalk

yep in the past I have also used hockey pucks as I am sure others here have too

basically anything to help protect it

GaleForce · 02-12-2014, 11:06 PM

Quote:

Originally Posted by LMBmikeZ

yep in the past I have also used hockey pucks as I am sure others here have too

basically anything to help protect it

Yep. Real hockey pucks. Not the cheap Chinese crap Walmart sells. Those will crack/split.

zefaulter · 02-13-2014, 08:48 AM

Quote:

Originally Posted by GaleForce

Yep. Real hockey pucks. Not the cheap Chinese crap Walmart sells. Those will crack/split.

My hockey puck cracked after a few use. I thought that was expected?

LMBmikeZ · 02-13-2014, 10:18 AM

Quote:

Originally Posted by zefaulter

My hockey puck cracked after a few use. I thought that was expected?

yes they will crack but the really cheap ones will break apart as soon as you put any weight on them. best bet is go to a source for sports store or another reputable hockey store like hockey life and buy "good" pucks they will last better

GaleForce · 02-13-2014, 11:21 AM

Quote:

Originally Posted by LMBmikeZ

yes they will crack but the really cheap ones will break apart as soon as you put any weight on them. best bet is go to a source for sports store or another reputable hockey store like hockey life and buy "good" pucks they will last better

^^^^^ This.

LMBmikeZ · 02-13-2014, 11:24 AM

they are kinda like drill bits, knife blades etc, consumables they are only good for so many uses before you should just toss it and get new ones

zefaulter · 02-13-2014, 12:48 PM

talking about tools: anyone uses impact driver to change wheels/tires? will they damage anything?

Boomer370 · 02-13-2014, 12:57 PM

Quote:

Originally Posted by zefaulter

talking about tools: anyone uses impact driver to change wheels/tires? will they damage anything?

I have an impact driver but never used on my 370 wheels.

I'm afraid it rattle and shakes that it might scuff the rims, I'd do it old school IMO.

zefaulter · 02-13-2014, 01:04 PM

Quote:

Originally Posted by Boomer370

I have an impact driver but never used on my 370 wheels.

I'm afraid it rattle and shakes that it might scuff the rims, I'd do it old school IMO.

I'm worried about the downward force it applies. I have a feeling that may strip threads.

Ire · 02-13-2014, 05:09 PM

i use an impact wrench with air line. never had any problems with scuffing the rim ...

02-12-2014, 10:26 AM	#93 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 16	Oh I never posted this pic, I saw Melloyello back when the weather was nice. Makes my car look like a 4x4 lol LMBmikeZ and zefaulter like this. __________________ [Powerhouse Amuse] [HKS] [Volk Racing] [KW Suspensions] [Eibach] [SPL] [TRS] [EVO-R] [NISMO]

02-13-2014, 11:24 AM	#101 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	they are kinda like drill bits, knife blades etc, consumables they are only good for so many uses before you should just toss it and get new ones zefaulter likes this. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

02-13-2014, 05:09 PM	#105 (permalink)
Ire Track Member Join Date: Sep 2011 Location: Toronto Posts: 785 Drives: 09 MB Rep Power: 16	i use an impact wrench with air line. never had any problems with scuffing the rim ... __________________ Advan Racing, KW, GTHaus, Eibach, Berks, Injen, Motul, K&N, SPC, Sunline Racing, Z1, Evo-R, Aerojacket, Stoptech, Amuse Powerhouse, Defcon Racing, Fly1 Motorsports. pics

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tour d'Orange 2014 - January 1, 2014	zero	Southern California Region	3	12-27-2013 01:34 PM
2014 Chevrolet Camaro LS7, Twin-Turbo V-6 Revealed In 2014 GM Document	96bigbody	Other Vehicles	2	12-21-2012 07:47 PM
AnY car meets in SO CAL?	djsekz	Southern California Region	7	11-19-2011 08:46 AM
2 jax fla car meets 9/10	ddvette9	South East Region	1	09-09-2011 02:53 PM
Z meets in dfw???	UNKNOWN_370	Texas	3	04-04-2011 04:06 PM

02-13-2014, 12:48 PM	#102 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	talking about tools: anyone uses impact driver to change wheels/tires? will they damage anything?