Coating on Z1 Rotors

Element600ee · 11-15-2014, 10:35 AM

you also asked about the direction of the rotor . if you look at the way the veins inside the rotor go they should pull air from the center outward . the outer slots direction vary from manufacture to manufacture . every performance rotor ive seen the leading edge of the inner vein should be forward . there made to draw air from the center outward . btw it deff sounds like the brake cleaner ate the coating . that kinda dissapoints me most manufactures use coatings that will not break down from using break clean ( considering that its BRAKE clean youd think they would use a better coating ) . if you clean that all off you can get a zink coating in a spray can . its what ive used in the past on rotors that had no coating to keep them from rusting . its like a grey ceramic color it dosnt look bad at all and if you get a little on them where the pads touch it cleans it right off as soon as you use the brakes . good luck brother .

Read T · 11-15-2014, 10:52 AM

Quote:

Originally Posted by Wonka2581

Ok so then it was the brake cleaner... Thanks for the info brother...

But still, you should be able to use brake cleaner on your brakes without the finish melting off.

Wonka2581 · 11-15-2014, 11:08 AM

Quote:

Originally Posted by Read T

But still, you should be able to use brake cleaner on your brakes without the finish melting off.

I totally agree!!! I want to know what Z1 has to say about this....

Read T · 11-15-2014, 01:21 PM

Quote:

Originally Posted by Element600ee

you also asked about the direction of the rotor . if you look at the way the veins inside the rotor go they should pull air from the center outward . the outer slots direction vary from manufacture to manufacture . every performance rotor ive seen the leading edge of the inner vein should be forward . there made to draw air from the center outward . btw it deff sounds like the brake cleaner ate the coating . that kinda dissapoints me most manufactures use coatings that will not break down from using break clean ( considering that its BRAKE clean youd think they would use a better coating ) . if you clean that all off you can get a zink coating in a spray can . its what ive used in the past on rotors that had no coating to keep them from rusting . its like a grey ceramic color it dosnt look bad at all and if you get a little on them where the pads touch it cleans it right off as soon as you use the brakes . good luck brother .

Thanks for the recommendation. On these specific rotors, the vanes are not directional. The only thing that is directional is the slots.

Element600ee · 11-15-2014, 08:14 PM

Quote:

Originally Posted by Read T

Thanks for the recommendation. On these specific rotors, the vanes are not directional. The only thing that is directional is the slots.

then its up to the manufacture . some prefer the pad sweep towards the center some prefer the sweep to the outer . you can probably look up what way they prefer them be installed . most manufactures mark the rotors l or r so there is no question . but given the issues with the coating and brake clean im guessing they dropped the ball in some aspects on these rotors .

Read T · 11-16-2014, 11:26 AM

Quote:

Originally Posted by Element600ee

then its up to the manufacture . some prefer the pad sweep towards the center some prefer the sweep to the outer . you can probably look up what way they prefer them be installed . most manufactures mark the rotors l or r so there is no question . but given the issues with the coating and brake clean im guessing they dropped the ball in some aspects on these rotors .

Yeah, no marking on the box or on the rotors themselves. I just assumed they were pretty much non-directional and kinda more up to aesthetics.

CFZ · 12-01-2014, 10:52 PM

The coating is strictly there to prevent rust and keep them looking cool. They will most definitely come off with even the slightest aggressive driving. And when it does come off it will rust, but its definitely not something you have to worry about. I dont think those rotors are directional. Im sure they are just blanks that have slots on them for aesthetic purposes.

Read T · 12-02-2014, 11:15 AM

Yeah, I hit them with some high temp paint to keep them from rusting. That being said, after track day #4 with these rotors they are developing tiny crack-lets so I may just switch to a higher quality rotor (one that I can also get resurfaced).

11-15-2014, 10:35 AM	#16 (permalink)
Element600ee Base Member Join Date: Sep 2014 Location: Abingdon md Posts: 86 Drives: 10 370z Monterey Rep Power: 10	you also asked about the direction of the rotor . if you look at the way the veins inside the rotor go they should pull air from the center outward . the outer slots direction vary from manufacture to manufacture . every performance rotor ive seen the leading edge of the inner vein should be forward . there made to draw air from the center outward . btw it deff sounds like the brake cleaner ate the coating . that kinda dissapoints me most manufactures use coatings that will not break down from using break clean ( considering that its BRAKE clean youd think they would use a better coating ) . if you clean that all off you can get a zink coating in a spray can . its what ive used in the past on rotors that had no coating to keep them from rusting . its like a grey ceramic color it dosnt look bad at all and if you get a little on them where the pads touch it cleans it right off as soon as you use the brakes . good luck brother . Read T and Wonka2581 like this.

12-02-2014, 11:15 AM	#23 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 17	Yeah, I hit them with some high temp paint to keep them from rusting. That being said, after track day #4 with these rotors they are developing tiny crack-lets so I may just switch to a higher quality rotor (one that I can also get resurfaced). __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CZP 2-Piece Rotors - Stoptech Rotors - Hawk Pads - SS Lines Great Prices & Quality!!	Coz@Czp	Suspension/Brakes	29	07-07-2017 12:30 PM
every-dry Superhydrophobic coating	Cell	The Lounge (Off Topic)	5	08-17-2013 08:31 PM
powder coating	kensnismo	Nissan 370Z General Discussions	9	07-22-2011 06:38 PM
Powder Coating	JayYoon	Nissan 370Z General Discussions	2	05-19-2011 03:40 PM
powder coating in NY	Dsphoto	Wheels & Tires	0	04-30-2011 08:07 PM

12-01-2014, 10:52 PM	#22 (permalink)
CFZ Base Member Join Date: Jul 2010 Location: F-Town Posts: 134 Drives: 2010 370Z Rep Power: 233	The coating is strictly there to prevent rust and keep them looking cool. They will most definitely come off with even the slightest aggressive driving. And when it does come off it will rust, but its definitely not something you have to worry about. I dont think those rotors are directional. Im sure they are just blanks that have slots on them for aesthetic purposes.