Stance Pro Comp 2 Coilover Review

synolimit · 08-13-2014, 03:17 PM

Wtf???!!!??!

https://m.youtube.com/watch?feature=...&v=l5i_kyW7_Y4

Masterbeatty · 08-13-2014, 04:15 PM

That goes away after a week. I called them on that, but i freaked out too. It's the valves breaking in.

synolimit · 08-13-2014, 08:34 PM

Quote:

Originally Posted by Masterbeatty

That goes away after a week. I called them on that, but i freaked out too. It's the valves breaking in.

Its loud as ****!! Well I'm gutted but still. I knew it was internal and the piston shaft moving up and down. When I turn into my garage and go real slow that noise is real slow too like opening a old door in a haunted house. Its embarrassing!

Masterbeatty · 08-13-2014, 09:26 PM

Yha mine was loud too but he only thing I hear back there now is the solid bushings and road noise. Funny thing is when I sent stance a video clip, my gopro w/ external mic couldn't pick it up out side the car (wheel well), it was only heard inside near strut tower. But I spoke with their engineer and it was a normal noise. Where did you mount the reservoirs?

synolimit · 08-14-2014, 11:38 AM

Quote:

Originally Posted by Masterbeatty

Yha mine was loud too but he only thing I hear back there now is the solid bushings and road noise. Funny thing is when I sent stance a video clip, my gopro w/ external mic couldn't pick it up out side the car (wheel well), it was only heard inside near strut tower. But I spoke with their engineer and it was a normal noise. Where did you mount the reservoirs?

Ok thanks. Scott at Stance and Adam at race consulting couldn't tell me anything. I really hope you're right because it sounds like the shaft is F'd!!!!

Through those holes will also go brake duct cooling lines to use up that space.

Super Werty · 08-14-2014, 03:38 PM

Quote:

Originally Posted by synolimit

Wtf???!!!??!

https://m.youtube.com/watch?feature=...&v=l5i_kyW7_Y4

This video scared my dog

synolimit · 08-14-2014, 03:57 PM

Did you notice on the rear lower mount that the mount was to big for the bushing it wraps around? My mount was like 1/8th to big but when I tightened the bolt it closed the gap by bending it inward.

Also, did you notice the same lower mount has one hole WAY to big! One side with the nuts normal but the bolt head side is a 1/8" gap all around.

Masterbeatty · 08-14-2014, 05:11 PM

Quote:

Originally Posted by synolimit

Did you notice on the rear lower mount that the mount was to big for the bushing it wraps around? My mount was like 1/8th to big but when I tightened the bolt it closed the gap by bending it inward.

Also, did you notice the same lower mount has one hole WAY to big! One side with the nuts normal but the bolt head side is a 1/8" gap all around.

Tell you the truth I can't remember. I did notice it was hard to get the old bolt out. I had to use a persuader and "mechanical agitation" to get the damn thing to move.

But your locations are more perminate than where I put mine, phuckinlegit. You just movtivated me to refine my res. locations.

looks good.

synolimit · 08-14-2014, 07:07 PM

Quote:

Originally Posted by Masterbeatty

Tell you the truth I can't remember. I did notice it was hard to get the old bolt out. I had to use a persuader and "mechanical agitation" to get the damn thing to move.

But your locations are more perminate than where I put mine, phuckinlegit. You just movtivated me to refine my res. locations.

looks good.

Hmm mine popped right out. Long as the suspensions unloaded and you pick up on the knuckle.

Well noise is still there. So loud, so annoying. Something wrong in the upper mount area.

Super Werty · 08-16-2014, 09:39 AM

Can you guys put up more pics of the rear coil overs installed

synolimit · 08-16-2014, 01:30 PM

synolimit · 08-22-2014, 07:53 PM

Noise is still there. I want to kill myself!

Ubetit · 08-23-2014, 07:10 AM

Heard that noise for myself, it would drive me crazy too.

DEpointfive0 · 08-23-2014, 12:29 PM

Quote:

Originally Posted by synolimit

Why would you go progressive with the helper spring?

synolimit · 08-23-2014, 04:21 PM

It's not. The suspension is unloaded. The helper is only like 50lbs. Isn't 100% compressed and unused once loaded.

08-13-2014, 03:17 PM	#16 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Wtf???!!!??! https://m.youtube.com/watch?feature=...&v=l5i_kyW7_Y4 aszyd likes this. __________________ 13 370z-

08-13-2014, 04:15 PM	#17 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	That goes away after a week. I called them on that, but i freaked out too. It's the valves breaking in. __________________ 2011 MB 6MT Masterbeatty journal

08-13-2014, 09:26 PM	#19 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	Yha mine was loud too but he only thing I hear back there now is the solid bushings and road noise. Funny thing is when I sent stance a video clip, my gopro w/ external mic couldn't pick it up out side the car (wheel well), it was only heard inside near strut tower. But I spoke with their engineer and it was a normal noise. Where did you mount the reservoirs? synolimit likes this. __________________ 2011 MB 6MT Masterbeatty journal

08-14-2014, 03:57 PM	#22 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Did you notice on the rear lower mount that the mount was to big for the bushing it wraps around? My mount was like 1/8th to big but when I tightened the bolt it closed the gap by bending it inward. Also, did you notice the same lower mount has one hole WAY to big! One side with the nuts normal but the bolt head side is a 1/8" gap all around. __________________ 13 370z-

08-16-2014, 09:39 AM	#25 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 12	Can you guys put up more pics of the rear coil overs installed __________________ The Build

08-16-2014, 01:30 PM	#26 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Super Werty likes this. __________________ 13 370z-

08-22-2014, 07:53 PM	#27 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Noise is still there. I want to kill myself! __________________ 13 370z-

08-23-2014, 07:10 AM	#28 (permalink)
Ubetit Track Member Join Date: May 2012 Location: Ohio Posts: 527 Drives: the women lazy Rep Power: 13	Heard that noise for myself, it would drive me crazy too.

08-23-2014, 04:21 PM	#30 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	It's not. The suspension is unloaded. The helper is only like 50lbs. Isn't 100% compressed and unused once loaded. __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
M7 Coilover Review	martin82	Brakes & Suspension	32	12-15-2013 01:32 PM
REVIEW: Stance Wheels SC-5ive	wlmngtn	Wheels & Tires	9	11-29-2012 08:20 PM
GT Motoring Challenge Comp coilover review	KillerBee370	Brakes & Suspension	25	10-11-2010 05:35 PM
Cusco, HKS, KSport, KW, Megan Racing, Stance GR+ COILOVER SALE @ ViViD Racing!!!	vividracing	Suspension/Brakes	0	08-08-2010 02:17 PM