Front camber arm selection?

Mike

The voodoo are adjusted at the outer ends of the control arms, bolts that face outwards

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

Rusty

Yeah, you would have to turn the tire to one side to get in there to adjust and tighten. SPL's, all you need is 1/2"drive, 1/2" socket on an 18" extension going over the top of tire to adjust. To tighten, a 3/16" allen socket on a 3/8" drive extension, up from the bottom. No turning of the tire to side, then the other side to adjust and tighten. Rememeber I just been through this.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html