Replacing 370Z Rotors

XwChriswX

I had the Z1 brake upgrade (Pads/Rotors/Fluid/SS Lines) done Feb 2012, and have over 20k mi on them since.

I have the Cross-Drilled/Slotted. The Drill holes are sunk in, if that's what you're asking about them??

If I could do it again, I would just do slotted instead of cross drilled/ slotted since I went for aesthetics rather than pure because racecar.

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

JARblue

Here is an example I found to explain the idea. The holes circles in purple/pink appear to be chamfered (it is possible that this was not done on purpose in this photo - I'm not sure where it came from). The other holes are not chamfered. If cross drilled rotors are for racing application, they should be chamfered to reduce the likelihood of cracking. Of course, the best solution is to have the holes cast in place when the rotor is cast.

__________________