Air Ride Suspension

stunner253

heres my new wheel set up.

Liquid_G

Not many but i'll tell you this. I hid my compressors and tank under a false floor. Added a second 380c compressor and also 2 water traps, hanging off the end of each tank fitting.

You can see the tank here, this was before the second compressor was added.



And you can see the controller here:



The Install manual tells you this but i'll re-interate here.. You need to bash in the area behind the front struts or you'll have clearance issues with the front bag rubbing.



Also you'll notice I have the SPL FUCA's to correct some camber.. I'm on 20's and like less than an inch from getting the front bumper on the ground because the control arms hit the inside on the fender when fully aired out. 19" or less wheels shouldn't be an issue.

__________________

GaleForce

Nice work

I was going to do air, but probably not with my future body plans.

__________________

KaienZ34

Damn so nice, and thanks for all the info it is greatly appreciated. I'm on 19's and not very aggressive at 19x9.5+20-255/35/19----19x10.5+0-295/30/19. I don't know if i'll be able to lay it flat or not, still should be pretty low though. Best part is i'll be able to get in and out of my drive way without rubbing my front lip.

__________________

Liquid_G

exactly. I consider air suspension almost like insurance against scraping the hell out of lips and exhausts etc..

__________________

xxAGAVExx

Subd


Sent from my iPhone using Tapatalk

__________________
l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD | Lots of SPL and Carbon Fiber |

6MT-Z34

Can you guys post your tank set up?

Ritch7714

bump, looking to buy my air ride in a few weeks. looking to see if any one has any new setups

DOM_370z

__________________

NorthStyle

I have the Stance cup kit setup... still working out the bugs though as I can't get the front to lift; I think the solenoid for raising isn't receiving power :\

DIMA UVAT

How to install a cup kit on the G37 where the rear springs are separate from coilowers?

NorthStyle

Depends on if you're wanting just the front to lift, or all around. If it's just the front, then it would be the same as installing OEM-style coilovers. I'm not aware of anyone with a Z/G running them all-around but I don't think it'd be too different than any of the air suspension setups.

DIMA UVAT

Planned installation of this kit Комплект пневмоцилиндры Air Cups (перед + зад) плюс управление

shadow85

Anyone able to help me.

I want to be able to lift mainly just the front end over bumps etc and then drop back to normal height. I have a stock 15'Z sports, stock height and will have Work meister S13P wheels on them soon enough and a SS front lip. 19x9.5 +17 front and 19x10.5 +12 R.

What is the cheapest, effective and reliable solution for me to be able to do this with that setup?

Cheers.

NorthStyle

No offense, but if you're at stock height with a larger-than-stock wheel/tire setup you shouldn't need any assistance getting over bumps.

But to answer your question: none of these options are cheap; my cup kit cost more than some air bag setups but I preferred to only adjust when needed. Your best bet would've been to jump on one of the Black Friday sales. Some of the companies may have a Cyber Monday sale or more sales leading up to Christmas so if you're in the market now it the time to purchase.